1,1,2,2-テトラフルオロ-2-[1,2,2-トリフルオロ-1-(トリフルオロメチル)-2-(1,2,2-トリフルオロエテニルオキシ)エトキシ]-1-エタンスルホン酸フルオリド

危険有害性情報のコード(GHS)

• 絵表示(GHS)

  

• 注意喚起語

  Warning

• 危険有害性情報

  H315：皮膚刺激

  H319：強い眼刺激

  H335：呼吸器への刺激のおそれ

• 注意書き

  P261：粉じん/煙/ガス/ミスト/蒸気/スプレーの吸入を避ける こと。

  P271：屋外または換気の良い場所でのみ使用すること。

  P280：保護手袋/保護衣/保護眼鏡/保護面を着用するこ と。

1,1,2,2-テトラフルオロ-2-[1,2,2-トリフルオロ-1-(トリフルオロメチル)-2-(1,2,2-トリフルオロエテニルオキシ)エトキシ]-1-エタンスルホン酸フルオリド 価格

1,1,2,2-テトラフルオロ-2-[1,2,2-トリフルオロ-1-(トリフルオロメチル)-2-(1,2,2-トリフルオロエテニルオキシ)エトキシ]-1-エタンスルホン酸フルオリド 化学特性,用途語,生産方法

• 使用

  Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride can be used as organic synthesis intermediates and pharmaceutical intermediates, mainly used in laboratory research and development processes and chemical production processes.

• 合成

  
  (1) Intermediate synthesis In a 1L reactor, add 100ml of dimethylacetamide, 8g of potassium fluoride, and 200g (1.11mol) of tetrafluoroethane-|?-sultone,Subsequently, 500g (3mol) of hexafluoropropylene oxide was introduced at a flow rate of 0.3kg/h for addition reaction, and the reaction temperature was controlled at 20??C.The reaction pressure is controlled at 0.4MPa. After the introduction of hexafluoropropylene oxide is completed, the reaction is continued for 1 hour. After the reaction is completed,The reaction liquid was rectified to obtain 528g (1.03mol) of intermediate, with a yield of 92% and a purity of 99.1%;(2) PSVE synthesis In a moving bed reactor (volume 2L, material 316L, produced by Tianjin Qixi Technology Co., Ltd.),A mixture of 500g (0.97mol) of the intermediate obtained in step (1) and 600g of potassium carbonate (4.34mol) was passed through the salt formation zone and decarboxylation zone of the moving bed reactor in turn (the salt formation temperature was set to 150??C,The decarboxylation temperature is set to 360??C) to carry out the salt formation reaction and the decarboxylation reaction, and the contact time of the salt formation reaction is 10 min by controlling the material feed rate.The contact time of the decarboxylation reaction is 25min, and the decarboxylation reaction product is collected by condensation to obtain a crude product.The crude product is rectified to obtain the product perfluoro-3,6-dioxa-4-methyl-7-octenesulfonyl fluoride with a purity of 98.5% and a yield of 85%.

1,1,2,2-テトラフルオロ-2-[1,2,2-トリフルオロ-1-(トリフルオロメチル)-2-(1,2,2-トリフルオロエテニルオキシ)エトキシ]-1-エタンスルホン酸フルオリド 生産企業

Global(115)Suppliers

16090-14-5, 1,1,2,2-テトラフルオロ-2-[1,2,2-トリフルオロ-1-(トリフルオロメチル)-2-(1,2,2-トリフルオロエテニルオキシ)エトキシ]-1-エタンスルホン酸フルオリド キーワード