2,4,6-トリフルオロ-1,3,5-トリアジン

危険有害性情報のコード(GHS)

• 絵表示(GHS)

  

• 注意喚起語

  Danger

• 危険有害性情報

  H310：皮膚に接触すると生命に危険

  H314：重篤な皮膚の薬傷?眼の損傷

  H318：重篤な眼の損傷

  H330：吸入すると生命に危険

• 注意書き

  P260：粉じん/煙/ガス/ミスト/蒸気/スプレーを吸入しないこ と。

  P280：保護手袋/保護衣/保護眼鏡/保護面を着用するこ と。

  P284：呼吸用保護具を着用すること。

  P302+P350：皮膚に付着した場合：多量の水と石鹸で優しく洗うこと。

  P303+P361+P353：皮膚（または髪）に付着した場合：直ちに汚染された衣 類をすべて脱ぐこと/取り除くこと。皮膚を流水/シャワー で洗うこと。

  P304+P340：吸入した場合：空気の新鮮な場所に移し、呼吸しやすい 姿勢で休息させること。

  P305+P351+P338：眼に入った場合：水で数分間注意深く洗うこと。次にコ ンタクトレンズを着用していて容易に外せる場合は外す こと。その後も洗浄を続けること。

  P310：ただちに医師に連絡すること。

  P320：特別な治療が緊急に必要である（このラベ ルの．．．を見よ）。

  P405：施錠して保管すること。

2,4,6-トリフルオロ-1,3,5-トリアジン 価格

MSDS Information

• 2,4,6-Trifluoro-1,3,5-triazine

2,4,6-トリフルオロ-1,3,5-トリアジン 化学特性,用途語,生産方法

• 外観

  無色～うすい黄色、液体

• 使用上の注意

  アルゴン封入

• 化学的特性

  Colorless liquid. Decompose violently with water and alcohol.

• 特性

  Cyanuric fluoride is a key intermediate in the synthesis of fluorine homotriazine reactive dyes. Compared with the traditional chlorotriazine reactive dyestuff, fluorine homotriazine reactive dyestuff has the following five advantages:
  1. Energy saving, low dyeing temperature (medium temperature type) 60℃, lower than KE type reactive dyestuff and comparable to M type reactive dyestuff.
  2. Emission reduction, environmental protection, high fixation rate, 15-20 percentage points higher than the corresponding chlorotriazine reactive dyestuff fixation rate, can improve the utilization rate of dyestuff, but also reduce the environmental pollution in the printing and dyeing process.
  3. Good stability of dyestuff.
  4. High stability of peroxide resistance.
  5. Not restricted by AOX regulations.

• 使用

  Cyanuric fluoride acts as a fluorinating agent used in the conversion of carboxylic acids into acyl fluorides. It is used as a precursor for fibre-reactive dyes. It is a specific reagent for tyrosine residues in enzyme. Further, it is involved in the preparation of cyanuric acid by hydrolysis

• 製造方法

  In a dry three-necked flask equipped with stirrer, thermometer and reflux condenser, add 0.2mol (36.9g) of cyanuric chloride, 0.63mol (36.5g) of finely ground anhydrous potassium fluoride, 60mL of xylene and 2.0g of polyethylene glycol-600, heat and stir at 110℃, reflux for 16h and distill after a little cooling, collect the fraction at 72℃~75℃, and get liquid of cyanuric trioxide.

• 一般的な説明

  Liquid.

• 反応プロフィール

  Cyanuric fluoride is used as a mild fluorinating agent for organic chemicals, and it reacts with water in a manner similar to an acyl halide, forming hydrofluoric acid and cyanuric acid. Since it forms hydrofluoric acid, cyanuric fluoride is a source of soluble fluoride ions. Unlike other halide ions, fluoride is quite reactive, acting as a weak base and participating in some unique reactions. In particular, fluorides react strongly with compounds containing calcium, magnesium, or silicon ions, which means that solutions containing soluble fluorides are corrosive to both living tissue and glass. Hydrofluoric acid can cause severe chemical burns and is one of the few materials that can etch glass. It is also a toxic gas in its anhydrous form.

• 健康ハザード

  Cyanuric fluoride is highly toxic by skin contact and inhalation.

• 火災危険

  When heated to decomposition, Cyanuric fluoride emits very toxic fumes of fluorides and nitrogen oxides. Avoid decomposing heat.

2,4,6-トリフルオロ-1,3,5-トリアジン 上流と下流の製品情報

2,4,6-トリフルオロ-1,3,5-トリアジン 生産企業

Global(198)Suppliers

675-14-9, 2,4,6-トリフルオロ-1,3,5-トリアジン キーワード