2,3,5,6-テトラクロロピリジン

危険有害性情報のコード(GHS)

• 絵表示(GHS)

  

• 注意喚起語

  Warning

• 危険有害性情報

  H301：飲み込むと有毒

  H302：飲み込むと有害

  H315：皮膚刺激

  H319：強い眼刺激

  H335：呼吸器への刺激のおそれ

  H401：水生生物に毒性

  H411：長期的影響により水生生物に毒性

• 注意書き

  P261：粉じん/煙/ガス/ミスト/蒸気/スプレーの吸入を避ける こと。

  P264：取扱い後は皮膚をよく洗うこと。

  P264：取扱い後は手や顔をよく洗うこと。

  P270：この製品を使用する時に、飲食または喫煙をしないこ と。

  P280：保護手袋/保護衣/保護眼鏡/保護面を着用するこ と。

  P305+P351+P338：眼に入った場合：水で数分間注意深く洗うこと。次にコ ンタクトレンズを着用していて容易に外せる場合は外す こと。その後も洗浄を続けること。

  P405：施錠して保管すること。

  P501：内容物/容器を．．．に廃棄すること。

2,3,5,6-テトラクロロピリジン 価格

MSDS Information

• 2,3,5,6-Tetrachloropyridine

2,3,5,6-テトラクロロピリジン 化学特性,用途語,生産方法

• 外観

  白色～淡黄色の結晶又は結晶性粉末

• 溶解性

  エーテル、エタノール、石油エーテルに可溶:水に不溶。

• 用途

  有機合成原料。

• 用途

  製造中間体

• 使用

  2,3,5,6-Tetrachloropyridine is used as a chemical intermediate in the production of chlorpyrifos and triclopyr.

• 合成

  2,3,5,6-Tetrachloropyridine is synthesised in three steps by chemical reaction using 2,3,4,5,6-pentachloropyridine as a raw material. The specific synthesis steps are as follows:
  Step (1): 2 parts of pentachloropyridine was dissolved in 200 parts of ethanol at 40 ℃ until 0.6 part of metallic manganese powder was added after the raw material was completely dissolved; 1.3 parts of ammonium acetate, 5 parts of water and 10 parts of ethanol were mixed Uniform dropping, dropping time of 2h; After completion of the dropwise addition, the reaction solution was stirred for 4 hours.
  Step (2): add ammonia to adjust the pH value of 8~9, heated to 65 , through 3L / min air 1h reaction was oxidized.
  Step (3): Oxidation liquid filtration: The resulting solid was filtered and separated by washing with 20 parts of toluene. Ethanol washed twice, washed twice, after dryingproduct. Products tested by the magnetic content of manganese oxide products, the specific surface area of 53m2 / g, Mn content of 70.90%, CaO content0.0012%, K content 0.0005%, Na content 0.0025%, S content 0.0070%. The XRD pattern of manganese tetroxide and the comparison with the standard map is Mn3O44. Figure 5 (a) and (b) are scanning electron micrographs. It can be seen that the product is a hollow spherical structure. (C) and (d) are transmission electron micrographs, and the hollow structure can be seen and the product is from 10 to 25 nm Grain composition. The filtrate was filtered and the organic solution of the solution of manganese tetrachloride was combined and evaporated to recover the toluene solvent. Then, 10 parts of 5% dilute hydrochloric acid was added at a temperature of 65 ℃ and stirred for 1 h to obtain 2,3,5,6-tetrachloropyridine ; The yield was 99.5%.
  

2,3,5,6-テトラクロロピリジン 上流と下流の製品情報

2,3,5,6-テトラクロロピリジン 生産企業

Global(302)Suppliers

2402-79-1, 2,3,5,6-テトラクロロピリジン キーワード