Description
2-Nitropropane, also known as dimethylnitromethane or isonitropropane, is a colourless, oily liquid with a mild and sweet odour. This flammable compound is soluble in water and various organic solvents, including chloroform. Its vapors can form an explosive mixture when combined with air. 2-Nitropropane serves as a co-solvent in paint formulations, enhancing pigment wetting, optimizing flow properties, and facilitating electrostatic processing. Additionally, it contributes to a shorter paint drying time.
Chemical Properties
2-Nitropropane, also known as 2-NP, is an aliphatic nitro compound that appears as a colourless, flammable liquid with a mild fruity odour. It can dissolve in water (1.7 mL/100 mL at 20C) and is miscible with organic solvents.
Like other nitroalkanes, 2-nitropropane exists in equilibrium with 2-propane nitronic acid (HSDB 1988). A 0.01 M aqueous solution of 2-NP has a pH of 6.2. When reacted with inorganic bases and amines, 2-nitropropane forms salts that are flammable when dry. It is sensitive to detonation when combined with oxidizers, and a mixture of 2-nitropropane and ammonium nitrate serves as a commercial explosive.
Physical properties
Colorless, oily liquid with a mild, fruity odor. 2-Nitropropane was detected in two studies at
concentrations of 3.1 and 5.2 ppm
v (Crawford et al., 1984).
Uses
2-Nitropropane is primarily used as a solvent for organic compounds and coatings; with vinyl resins, epoxy paints, nitrocellulose, and chlorinated rubber; in printing inks, adhesives, and printing as flexographic inks; maintenance with traffic markings on roads and highways; shipbuilding; and general maintenance. It also has limited use as a paint and varnish remover. 2-Nitropropane is also used as a solvent in food processing industries for fractionation of a partially saturated vegetable oil.
Preparation
The synthesis of 2-nitropropane can be accomplished directly by nitration of 2-halopropanes with sodium nitrite. With 2-iodopropane, the reaction is carried out in dry DMF in the presence of urea. For the slower reacting 2-bromopropane, a longer reaction time and the presence of phloroglucinol as a nitrite ester scavenger is required.
Like 1-nitropropane, 2-nitropropane is also produced by vapor-phase nitration of propane with nitric acid at elevated temperature and pressure (Baker and Bollmeier 1978).
Definition
ChEBI: 2-nitropropane is a secondary nitroalkane that is propane in which a hydrogen at position 2 has been replaced by a nitro group. Mainly used as a solvent (b.p. 120℃). It has a role as a hepatotoxic agent, a carcinogenic agent, a polar aprotic solvent and a xenobiotic.
General Description
2-Nitropropane is a clear, colorless liquid with a pleasant odor that is soluble in many organic solvents, including chloroform. Its vapors may form an explosive mixture with air.
Air & Water Reactions
Highly flammable.
Reactivity Profile
2-Nitropropane is sensitive to heat. Can react with amines/heavy metal oxides, strong acids, strong alkalis, and chlorosulfonic acid. . The heat of adsorption of 2-Nitropropane on carbon, such as that found in cartridge respirators, is extremely high. Metal oxide catalysts, such as copper oxide or manganese oxide, can initiate ignition, therefore carbon respirators should not be used in environments that have a high vapor concentration of 2-Nitropropane.
Health Hazard
2-Nitropropane is a lung irritant. The acute effects of exposure to 2-nitropropane at 20-45 p.p.m. on workmen were anorexia, nausea, vomiting, diarrhea and severe occipital headache. Liver effects have been observed in animals chronically exposed to 2-nitropropane by inhalation.
Carcinogenicity
2-Nitropropane was classified by the International Agency for Research on Cancer (IARC) as Group 2B, possibly carcinogenic to humans, based on animal studies linking exposure to liver cancer in rats.The carcinogenicity of 2-nitropropane in humans was not evaluated due to the lack of adequate epidemiological data.
Environmental Fate
Photolytic. Anticipated products from the reaction of 2-nitropropane with ozone or OH radicals
in the atmosphere are formaldehyde and acetaldehyde (Cupitt, 1980).
Shipping
UN2608 Nitropropanes, Hazard Class: 3; Labels:
3-Flammable liquid.
Purification Methods
Purify it as for nitromethane. [Beilstein 1 IV 230.]
Toxicity evaluation
DNA damage can cause 2-NP metabolites such as N-isopropyl
hydroxylamine (IPHA) and hydroxylamine-O-sulfonic (HAS)
acid by a reactive oxygen generating process that can be inhibited
by free hydroxyl radical scavengers, catalase, and deferoxamine
mesylate, an iron chelating agent. IPHA causes DNA damage at
thymine and HAS most frequently induces DNA damage at
5'-TG-3', 5'-GG-3', and 5'
-GGG-3' sequences. Formation of
8-oxodesoxyguanine by IPHA or HAS increased in the presence
of metal ions.DNA damage caused by 2-NP metabolites plays an
important role in mutagenicity and carcinogenicity of 2-NP. The
liver damage induced by 2-NP is related to oxidative damage and
reduction in catalase (CAT) activity.
Incompatibilities
1-Nitropropane, a nitroparaffin compound,
forms explosive mixture with air. Contact with
heavy metal oxides may cause decomposition. Mixtures
with hydrocarbons are extremely flammable. Attacks
some plastics, rubber and coatings. May explode on heating.
Violent reaction with strong bases; strong acids and
metal oxides. Shock-sensitive compounds are formed
with acids, amines, inorganic bases and heavy metal
oxides. Incompatible with strong oxidizers, combustible
materials. 2-Nitropropane reacts with activated carbon
causing decomposition. This reaction may occur in
activated carbon respirator filters.
Toxics Screening Level
The current ITSL for 2-Nitropropane (20 μg/m3) is 20 μg/m3 as derived on September 3, 1991based on the EPA (1991) RfC of the same value. The averaging time (AT) assigned to the ITSL at that time was 24 hours, as per the default methodology at that time (Rule 232(2)(b)).
Waste Disposal
Incineration: large quantities
of material may require nitrogen oxide removal by catalytic
or scrubbing processes. Dilute with pure kerosene and
burn with care as it is potentially explosive. Consult with
environmental regulatory agencies for guidance on
acceptable disposal practices. Generators of waste containing
this contaminant (≥100 kg/mo) must conform with
EPA regulations governing storage, transportation, treatment,
and waste disposal.
