Bienenwachs

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H317：Kann allergische Hautreaktionen verursachen.

• Sicherheit

  P261：Einatmen von Staub vermeiden.

  P272：Kontaminierte Arbeitskleidung nicht außerhalb des Arbeitsplatzes tragen.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P302+P352：BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckmäßig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.

  P321：Besondere Behandlung

  P333+P313：Bei Hautreizung oder -ausschlag: Ärztlichen Rat einholen/ärztliche Hilfe hinzuziehen.

  P363：Kontaminierte Kleidung vor erneutem Tragen waschen.

  P501：Inhalt/Behälter ... (Entsorgungsvorschriften vom Hersteller anzugeben) zuführen.

bee's wax Chemische Eigenschaften,Einsatz,Produktion Methoden

• Chemische Eigenschaften

  Crude yellow beeswax is harvested together with honey and represents a secondary secretion of the bee. Once the honey is recovered from the honeycomb by draining the cells, the wax combs are washed with water, melted and poured into molds to harden. The wax is refined by melting in hot water to which sulfuric acid or alkali may be added to extract impurities. The resulting wax is referred to as yellow beeswax. Yellow beeswax contains cerolein, a mixture of fatty acids and soluble in hot alcohol and slightly soluble in cold alcohol; myricyl alcohol and myricyl palmitate, insoluble in alcohol. Beeswax is produced worldwide with the same chemical composition. The odor may vary slightly, depending on the source.

• Chemische Eigenschaften

  White wax consists of tasteless, white or slightly yellow-colored sheets or fine granules with some translucence. Its odor is similar to that of yellow wax but is less intense.

• Chemische Eigenschaften

  Beeswax absolute is obtained by alcohol extraction of beeswax. The yield is generally less than 1%.The yellowish-brown, viscous product has a mild, honey-like odor, and high tenacity; it is used almost exclusively in fine fragrances.

• Chemische Eigenschaften

  white to yellowish-white pieces or plates

• Physikalische Eigenschaften

  It is a yellowish to grayish-brown solid, somewhat brittle when cold, and presents a dull granular, noncrystalline fracture when broken. It becomes pliable at about 35°C.

• Occurrence

  Wax from the honeycomb of the bee, Apis mellifera L.

• Verwenden

  Beeswax is used to produce edible films (sodium caseinate, soy protein isolate, etc.). It can form a mixture with a variety of fatty acids and polyols to provide flexibile, elastic and stretchable films. It also decreases the water vapor permeability and enhances the mechanical properties of the film.

• Verwenden

  Beeswax is used to produce edible films (sodium caseinate, soy protein isolate etc.). It can form a mixture with a variety of fatty acids and polyols to provide flexibile, elastic and stretchable films. It also decreases the water vapor permeability and enhances the mechanical properties of the film.

• Definition

  The wax obtained from the honeycomb of the bee. It consists primarily of myricyl palmitate, cerotic acid esters and some high-carbon paraffins.

• synthetische

  By alcoholic extraction of the raw wax(Fenarolfs Handbook of Flavor Ingredients, 1975).

• Vorbereitung Methode

  Yellow wax (beeswax) is obtained from the honeycomb of the bee (Apis mellifera Linne′ (Fam. Apidae)); see Wax, Yellow. Subsequent treatment with oxidizing agents bleaches the wax to yield white wax.

• Allgemeine Beschreibung

  Beeswax is a natural wax that is formed from honeybee Apis mellifera. It is a lipid that contains hydrocarbons, esters and free acids, which can be used to lower the transference of water on films.

• Pharmazeutische Anwendungen

  White wax is a chemically bleached form of yellow wax and is used in similar applications: for example, to increase the consistency of creams and ointments, and to stabilize water-in-oil emulsions. White wax is used to polish sugar-coated tablets and to adjust the melting point of suppositories.
  White wax is also used as a film coating in sustained-release tablets. White beeswax microspheres may be used in oral dosage forms to retard the absorption of an active ingredient from the stomach, allowing the majority of absorption to occur in the intestinal tract.Wax coatings can also be used to affect the release of drug from ion-exchange resin beads.

• Sicherheitsprofil

  A mdd allergen. Combustible when heated.

• Sicherheit(Safety)

  White wax is used in both topical and oral formulations, and is generally regarded as an essentially nontoxic and nonirritant material. However, although rare, hypersensitivity reactions to beeswax (attributed to contaminants in the wax) have been reported.

• Lager

  When the wax is heated above 150℃, esterification occurs with a consequent lowering of acid value and elevation of melting point. White wax is stable when stored in a well-closed container, protected from light.

• Inkompatibilitäten

  Incompatible with oxidizing agents.

• Regulatory Status

  GRAS listed. Accepted for use as a food additive in Europe. Included in the FDA Inactive Ingredients Database (oral capsules and tablets; rectal, topical, and vaginal preparations). Included in nonparenteral medicines licensed in the UK. Included in the Canadian List of Acceptable Non-medicinal Ingredients.

bee's wax Upstream-Materialien And Downstream Produkte

Bienenwachs Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(269)Suppliers

8012-89-3, bee's wax Verwandte Suche: