Cadmiumtellurid

Bezeichnung:Cadmiumtellurid

CAS-Nr1306-25-8

Englisch Name:CADMIUM TELLURIDE

CBNumberCB5130942

SummenformelCdTe

Molgewicht240.01

MOL-Datei1306-25-8.mol

Synonyma

Cadmiumtellurid

Cadmiumtellurid physikalisch-chemischer Eigenschaften

Schmelzpunkt	1092 °C
Dichte	6.2 g/mL at 25 °C (lit.)
Dampfdruck	0Pa at 25℃
Brechungsindex	2.75
Löslichkeit	insoluble in H2O, dilute acid solutions
Aggregatzustand	crystalline
Farbe	Black
Wichte	6.2
Wasserlöslichkeit	Insoluble in water.
Crystal Structure	Hexagonal, Wurtzite (Zincite) Structure - Space Group P 63mc
Merck	14,1629
Siedepunkt	1130°C
Expositionsgrenzwerte	ACGIH: TWA 0.01 mg/m3; TWA 0.002 mg/m3; TWA 0.1 mg/m3 NIOSH: IDLH 9 mg/m3; IDLH 25 mg/m3; TWA 0.1 mg/m3
CAS Datenbank	1306-25-8(CAS DataBase Reference)
EPA chemische Informationen	Cadmium telluride (CdTe) (1306-25-8)

Sicherheit

Kennzeichnung gefährlicher	T,N,Xn
R-Sätze:	45-20/21/22-50/53
S-Sätze:	53-22-61-60
RIDADR	UN 2570 6.1/PG 3
WGK Germany	3
RTECS-Nr.	EV3330000
TSCA	Yes
HazardClass	6.1(b)
PackingGroup	III
HS Code	28429090
Toxizität	mouse,LD,oral,> 15gm/kg (15000mg/kg),Gigiena Truda i Professional'nye Zabolevaniya. Labor Hygiene and Occupational Diseases. Vol. 25(2), Pg. 42, 1981.

Gefahreninformationscode (GHS)

CADMIUM TELLURIDE Chemische Eigenschaften,Einsatz,Produktion Methoden

R-Sätze Betriebsanweisung:
R45:Kann Krebs erzeugen.
R20/21/22:Gesundheitsschädlich beim Einatmen,Verschlucken und Berührung mit der Haut.
R50/53:Sehr giftig für Wasserorganismen, kann in Gewässern längerfristig schädliche Wirkungen haben.
S-Sätze Betriebsanweisung:
S53:Exposition vermeiden - vor Gebrauch besondere Anweisungen einholen.
S22:Staub nicht einatmen.
S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.
S60:Dieses Produkt und sein Behälter sind als gefährlicher Abfall zu entsorgen.
Chemische Eigenschaften
Brownish-black, cubic crystals.Oxidizes on prolonged expo- sure to moist air. Insoluble in water and mineral acids except nitric, in which it is soluble with decomposition.
Physikalische Eigenschaften
Ladd investigated the temperature dependence of transmittance in the infrared region. As a result, transmittance in wavelength longer than 22 mm decreases as the temperature increases.
In the transmission spectra, weak absorption bands are observed in addition to the main absorption in λ: 60–70 mm.
The reflectance peaks in the infrared region are at 67 mm (300 K) and 65 mm (90 K)
Verwenden
Cadmium telluride finds applications as the semiconductor material in photovoltaics and infrared optical window. It is used in the production of thin film solar cells. It is doped with chlorine and used as a radiation detector for x-rays, alfa and beta particles. .
Verwenden
In semiconductor research, in phosphors.
Verwenden
Cadmium telluride may be used in photovoltaic solar cells as the window layer. CdTe was used in the preparation of an Au/Cu₂Te/CdTe/CdS/TCO/glass heterostructure for solar cell.
Vorbereitung Methode
A single crystal of cadmium telluride is grown by many methods. In the case of vapor growth, the methods include flowing a carrier gas or condensing CdTe vapor on a low temperature area. In the case of growth from melt, pulling down a quartz ampoule encapsulated with CdTe at the speed of 10 mm/h in the Stockbarger furnace is the easiest method. The temperature difference of 50℃–60℃ between the upper furnace and lower furnace is appropriate. The traveling method performed in the horizontal Stockbarger furnace is another method. Zone refining is done vertically, while encapsulated in the quartz tube. Processing is possible in the same way as Ge and Si. The material made by pressing cadmium telluride powder is called Irtran-6.
Thin films are deposited by vacuum evaporation using a conical basket heater made of Ta or W, or by direct heating in a boat. The substrate temperature is heated at 250℃ for a glass and 20℃–380℃ for a mica.
Application
Cadmium telluride is used as the substrate of low-pass filters and as the infrared transmitting window with antireflection coating.
Allgemeine Beschreibung
CdTe is a photonic material. Crystal structure of CdTe is zinc blende structure. 3CdTe is usually an obvious choice for photovoltaic applications because of its; low cost, direct band gap (1.44eV),3 high absorption coefficient, easily doped with p and n type dopants by several preparation techniques. 2
Hazard
Toxic by inhalation.
Structure and conformation
The space lattice of CdTe (Cadmium telluride) belongs to the cubic system, and the zinc-blend type structure has a lattice constant of a=0.646 nm and the nearest neighbor atomic distance of 0.279 nm. The cleavage plane is (110).

CADMIUM TELLURIDE Upstream-Materialien And Downstream Produkte

Cadmiumtellurid Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

1306-25-8, CADMIUM TELLURIDE Verwandte Suche:

Send Inquriy