9-BBN DIMER

Bezeichnung:9-BBN DIMER

CAS-Nr21205-91-4

Englisch Name:9-BBN DIMER

CBNumberCB4155805

SummenformelC16H30B2

Molgewicht244.04

MOL-Datei21205-91-4.mol

9-BBN DIMER physikalisch-chemischer Eigenschaften

Schmelzpunkt	150-152 °C(lit.)
Siedepunkt	365.8±48.0 °C(Predicted)
storage temp.	2-8°C
Löslichkeit	Soluble in tetrahydrofuran, ether, hexane, benzene, toluene, carbon tetrachloride, chloroform, dichloromethane and dimethylsulfide. Slightly soluble in cyclohexane, dimethoxyethane, diglyme and dioxane.
Aggregatzustand	crystalline
Sensitive	Air & Moisture Sensitive
BRN	605509
Stabilität	Hygroscopic, Moisture Sensitive
InChI	InChI=1S/C16H30B2/c1-5-13-7-2-8-14(6-1)17(13)19-18(20-17)15-9-3-10-16(18)12-4-11-15/h13-16H,1-12H2
InChIKey	IYDIZBOKVLHCQZ-GEEKYZPCSA-N
SMILES	B12([H]B3(C4CCCC3CCC4)[H]1)C1CCCC2CCC1

Sicherheit

Kennzeichnung gefährlicher	F,Xi
R-Sätze:	11-14/15-36/37/38
S-Sätze:	26-43
RIDADR	UN 3396 4.3/PG 2
WGK Germany	3
F	10-16
HazardClass	4.2
PackingGroup	I
HS Code	29349990
Speicherklasse	4.3 - Hazardous materials which set free flammable gases upon contact with water
Hazard Classifications	Eye Irrit. 2 Flam. Sol. 1 Skin Irrit. 2 STOT SE 3 Water-react 2

Gefahreninformationscode (GHS)

9-BBN DIMER Chemische Eigenschaften,Einsatz,Produktion Methoden

R-Sätze Betriebsanweisung:
R11:Leichtentzündlich.
R14/15:Reagiert heftig mit Wasser unter Bildung hochentzündlicher Gase.
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S43:Zum Löschen . . . (vom Hersteller anzugeben) verwenden (wenn Wasser die Gefahr erhöht, anfügen: "Kein Wasser verwenden").
Chemische Eigenschaften
white crystals or crystalline powder
Verwenden
Employed in the hydroboration of alkynes, nitriles, and ketones.
reaction suitability
reagent type: reductant
läuterung methode
It is available as the solid dimer or in tetrahydrofuran solution. The solid is relatively stable and can be purified by distillation in a vacuum (as dimer) and by recrystallisation from tetrahydrofuran (solubility at room temperature is 9.5%, 0.78M), filter off the solid under N2, wash it with dry pentane and dry it in vacuo at ca 100o. The solid is a dimer (IR 1567cm-1), stable in air (for ca 2 months), and can be heated for 24hours at 200o in an inert atmosphere without loss of hydride activity. It is a dimer in tetrahydrofuran solution also (IR 1567cm-1). It is sensitive to H2O and air (O2) in solution. Its concentration in solution can be determined by reaction with MeOH and measuring the volume of H2 liberated, or it can be oxidised to cis-cyclooctane-1,5-diol (m 73.5-74.5o). [IR: Knights & Brown J Am Chem Soc 90 5280 1968, Brown et al. J Am Chem Soc 96 7765 1974, Brown et al. J Org Chem 41 1778 1976, Brown & Chen J Org Chem 46 3978 1981, Fieser & Fieser Reagents for Org Synth 2 31, 3 24, 10 48, 15 43, 17, 49.] Borane pyridine complex [110 -51 -0] M 92.9, m 8-10o, 10-11o, b 86o/7mm, 100-1 0 1o/12mm, d 4 0.785. Dissolve it in Et2O and wash it with H2O in which it is insoluble. Evaporate the Et2O and distil the residual oil to gives better than 99.8% purity. Its vapour pressure is less than 0.1mm at room temperature. [Taylor et al. J Am Chem Soc 77 1506 1955, Beilstein 20 IV 2235.]

9-BBN DIMER Upstream-Materialien And Downstream Produkte

9-BBN DIMER Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

21205-91-4, 9-BBN DIMER Verwandte Suche:

Send Inquriy