Kupferthiocyanat

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H410：Sehr giftig für Wasserorganismen mit langfristiger Wirkung.

• Sicherheit

  P273：Freisetzung in die Umwelt vermeiden.

  P391：Verschüttete Mengen aufnehmen.

  P501：Inhalt/Behälter ... (Entsorgungsvorschriften vom Hersteller anzugeben) zuführen.

Cuprous thiocyanate Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R20/21/22:Gesundheitsschädlich beim Einatmen,Verschlucken und Berührung mit der Haut.
  R32:Entwickelt bei Berührung mit Säure sehr giftige Gase.
  R50/53:Sehr giftig für Wasserorganismen, kann in Gewässern längerfristig schädliche Wirkungen haben.

• S-Sätze Betriebsanweisung:

  S13:Von Nahrungsmitteln, Getränken und Futtermitteln fernhalten.
  S60:Dieses Produkt und sein Behälter sind als gefährlicher Abfall zu entsorgen.
  S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.

• Chemische Eigenschaften

  Copper(I) thiocyanate, CuSCN, [1111-67-7], MW 121.62, is a white powder when pure, but often the material of commerce is yellow. It is soluble in ammonia solution, alkali thiocyanate solutions, and diethyl ether, but it is only slightly soluble in water and dilute mineral acids. It is stable in air in the absence of moisture, but it slowly decomposes in the presence of moisture in air. It is used as an antifouling pigment.

• Charakteristisch

  Copper thiocyanate (CuSCN) is also a wide bandgap (3.6?eV) semiconductor and has a work function of about ?5.3?eV. The conductivity ranges between 10-2 and 10-3 S?cm-1, good stability, shows good transparency throughout the visible and near infrared spectrum. It has good chemical stability. It can be deposited through a solution processing approach at low temperature, making it compatible with flexible substrates. By using copper thiocyanate (CuSCN) instead of P3HT as the HTL, a higher device PCE was achieved. 

• Verwenden

  In marine antifouling paints; in primer compositions for explosives industry.

• Verwenden

  It is used as flame retardant. It is a good inorganic pigment, and is used as the antifouling paint for protecting the underwater surfaces of ships against vegetation. Manufacturing industrial chemicals, pharmaceuticals and also used in freezing solutions, electroplating , steel picking, printing, and corrosion inhibitor against acid gases.

• Verwenden

  The product can be prepared from Cu(CH₃COO)₂·H₂O, AgNO₃, NH₄NCS and im(im = imidazole). The structure and optical properties were reported. It is an air- and light-stable source of Cu(I).

• synthetische

  Copper(I) thiocyanate is prepared by the reaction of alkali metal thiocyanates with copper(I) chloride at 8090°C or by the reaction of copper(II) sulfate solutions with alkali metal thiocyanate in the presence of sulfite. It can also be prepared by precipitation from copper(II) salt solutions with hydrogen thiocyanate.

• Allgemeine Beschreibung

  We are committed to bringing you Greener Alternative Products,which adhere to one or more of The 12 Principles of Greener Chemistry. This product is an enabling product used as a Hole Transport Material for high-performance solar cells and thus has been enhanced for energy efficiency. Click here for more information.

• mögliche Exposition

  Used as a microbiocide and algaecide in antifouling paints. Used as a laboratory chemical and for making other chemicals. Some formulations may be designated Restricted Use Pesticide (RUP).

• Versand/Shipping

  UN3439 Nitriles, solid, toxic, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required

• Structure and conformation

  At least two polymorphs of cuprous thiocyanate have been characterized by X-ray crystallography. They both feature copper(I) in a characteristic tetrahedral coordination geometry. The sulfur end of the SCN- ligand is triply bridging so that the coordination sphere for copper is CuS3N.

• Inkompatibilitäten

  Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides

• Waste disposal

  Copper-containing soluble wastes can be concentrated through the use of ion exchange, reverse osmosis, or evaporators to the point where copper can be electrolytically removed and sent to a reclaiming firm. If recovery is not feasible, the copper can be precipitated through the use of caustics and the sludge deposited in a chemical waste landfill. Copper-containing wastes can be concentrated to the point where copper can be electrolytically removed and reclaimed. If recovery is not feasible, the copper can be precipitated by alkali; the cyanide destroyed by alkaline oxidation yielding a sludge which can be sent to a chemical waste landfill. In accordance with 40CFR165, follow recommendations for the disposal of pesticides and pesticide containers. Must be disposed properly by following package label directions or by contacting your local or federal environmental control agency, or by contacting your regional EPA office

Cuprous thiocyanate Upstream-Materialien And Downstream Produkte

Kupferthiocyanat Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(227)Suppliers

1111-67-7, Cuprous thiocyanate Verwandte Suche: