107－29－9

Raw materials And Preparation Products

Hazard Information

Material Safety Data Sheet(MSDS)

Questions And Answer

• Overview

  Acetaldehyde oxime is a reducing agent with low toxicity. In the 1990s, it replaced the highly toxic hydrazine as a boiler water deoxidizer. As its deoxidizing effect was forty times that of hydrazine, it became widely used as a new type of deoxidizer. Acetaldehyde oxime is also an important intermediate for synthesizing the pesticides Methomyl and Thiodicarb, two chemicals that are excellent large-scale pesticides. As the production of these pesticides continues to increase, so does the demand for acetaldehyde oxime. ;

• Chemical properties

  Colorless, needle-shaped crystals. There are two types of crystal structures: α-type and β-type. Relative molecular mass is 59.07. Relative density is 0.9656. Melting point is 46.5℃(α-type) and 12℃(β-type). Boiling point is 114.5℃. Refractive index is 1.4257. Very soluble in water, ethanol and ether. When heated with dilute acid, it will break down into acetaldehyde and hydroxylamine. Created by adding hydroxylamine to acetaldehyde aqueous solution. Used to identify or refine acetaldehyde. Avoid contact with strong oxidants and strong acids. Flammable and irritative to the eyes, respiratory system, and skin. Appropriate protective clothing should be worn when handled in large amounts. If it contacts the eyes, immediately rinse generously with water and seek medical attention. ;

• Uses

  • Pesticide intermediate, synthesis of pesticides “Methomyl”, “Thiodicarb”, etc.; organic synthesis intermediate.
  • When melted, excellent solvent for many inorganic and organic compounds, organic synthesis, stabilizer, plasticizer, alcohol denaturant.
  • Creation of acylamide through the aldehyde oxime one-pot method. With the presence of catalyst InCl3, acetaldehyde oxime replaces water and reacts with nitrile water to create acylamide at a high yield.
  ;

• Preparation

  With suitable precautions, to a solution of 325 gm (4.68 moles) of hy­droxylamine hydrochloride in 300 ml of water mixed with a solution of 255 gm (2.55 moles) of sodium carbonate in 600 ml of water, cooled in an ice-salt mixture, is added dropwise, with stirring, a solution of 200 gm (4.55 moles) of acetaldehyde in 100 ml of water. After standing overnight, the solution is saturated with sodium chloride and the product is separated by repeated extractions with ether.
  The combined ether extracts are dried over calcium chloride, filtered, and distilled to afford 215 gm (80%), b.p. 112-114°C (760 mm Hg).
  Because many aldehydes are not very water soluble, this reaction may be carried out either with vigorous stirring or by adding sufficient alcohol to make the reaction mixture homogeneous. When the product has to be purified by distillation, it has been recommended that the flask be im­mersed into an oil bath maintained at a constant temperature above the anticipated boiling point of the product rather than warming the product and oil bath up to the boiling range from room temperature. By this technique heptaldoxime, b.p. 103-107°C (66 mm Hg), m.p. 53-55°C, cy­clohexanone oxime, b.p. 100-105°C (10-12 mm Hg), m.p. 87-88°C; and methyl ethyl ketoxime, b.p. 150-155°C, have been prepared. The treatment of a carbonyl compound with a hydroxylamine salt, with or without a solvent (or water), and with a neutralization step of the hydroxylamine salt using a simple base may be considered as a general preparative procedure.
  ;

• Storage

  • Keep in cool, ventilated storerooms, away from fire and heat sources. Storage heat should not exceed 30℃.Store separately from oxidants, acids and edible chemical substances – do not mix together. Employ explosion-proof lighting and ventilation facilities. Do not handle with machinery and tools that easily produce sparks. The storage area should have emergency measures for leaks and adequate storage equipment.
  • Store in a sealed and dark container.
  ;

• Preparation

  Acetaldehyde oxime is produced through the reaction between hydroxylamine and acetaldehyde aqueous solution. The reaction equation is as follows: CH3CHO+NH2OH•HCl+NaOH→CH3CH=NOH+NaCl+H2O
  In current industrial production, high levels of crystalline hydroxylamine sulfate are widely used as raw material, made into a 20%~50% aqueous solution and combined with acetaldehyde to create acetaldehyde oxime. The reaction equation is as follows: CH3CHO+(NH2OH)2•H2SO4→CH3CH=NOH
  In the aforementioned addition of acetaldehyde into hydroxylamine sulfate aqueous solution, the reaction occurs for 2 hours in 40~50℃ temperature. After it is cooled, inorganic salts are removed to achieve a clear aqueous solution of approximately 50% acetaldehyde oxime. Through inspection, it is revealed that there are very few impurities in addition to acetaldehyde and water in the solution, and the yield of acetaldehyde oxime is above 90% (as hydroxylamine sulfate). Extraction and refinement of this solution can yield a product of over 90% acetaldehyde oxime. ;

• Category

  Flammable Liquid ;

• Toxicity level

  Highly toxic ;

• Acute Toxicity

  Abdominal injection – small mice LD50: 100Mg/kg ;

• Explosivity characteristics

  May explode when mixed with water vapor and air. ;

• Flammability characteristics

  Flammable; releases toxic nitrogen oxide gas at high temperatures ;

• Storage and Transport

  Ventilated, low-temperature and dry storage; store and ship separately from oxidants. ;

• Extinguishing agents

  Dry powder, carbon dioxide, sand, foam ;

Spectrum Detail

Well-known Reagent Company Product Information

Supplier

Related Products