Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Acetaldehyde oxime > Acetaldehyde oxime(107-29-9)

Acetaldehyde oxime(107-29-9)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Acetaldehyde oxime
Synonyms
Acetaldoxime
CAS
107-29-9
Formula
C2H5NO
Molecular Weight
59.07
EINECS
203-479-6
RTECS
AB2975000
RTECS Class
Mutagen
Merck
13,43
Beilstein/Gmelin
1209252
Beilstein Reference
4-01-00-03121
EC Class
flammable

Physical and Chemical Properties

Appearance
A colorless liquid with a pungent odor.
Solubility in water
Soluble
Melting Point
47
Boiling Point
115
Vapor Pressure
13
Density
0.969 g/cm3 (17 C)
pKa/pKb
11.82 (pKa)
Partition Coefficient
-.13
Heat Of Vaporization
38.9 kJ/mol
Usage
Aldoximes, such as acetaldehyde oxime, are used as intermediates in chemical synthesis.
Refractive Index
1.424 (20 C)

First Aid Measures

Ingestion
Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage
Keep away from heat, sparks, and flame. Refrigerator/flammables.
Handling
Wash thoroughly after handling. Wash hands before eating. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Ingestion
Harmful if swallowed. May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
Inhalation
Harmful if inhaled. May cause respiratory tract irritation.
Skin
May cause skin irritation. Harmful if absorbed through the skin.
Eyes
May cause eye irritation.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. May polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.
EC Risk Phrase
R 10 22 36/38
EC Safety Phrase
S 26 36
UN (DOT)
2332

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Poison Class
3

Fire Fighting Measures

Flash Point
40
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use agent most appropriate to extinguish fire.
Upper exp. limit
50
Lower exp. limit
4.2
Fire Potential
HIGHLY FLAMMABLE.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment.

Stability and Reactivity

Stability
Stable under normal temperatures and pressures.
Incompatibilities
Strong oxidizing agents; strong acids.
Decomposition
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen.
Combustion Products
When heated to decomposition it emits toxic fumes of oxides of nitrogen.

Transport Information

UN Number
2332
Hazard Class
3
Packing Group
III
HS Code
2928 00 90
Contact More