107-72-2

Colorless to yellow liquid. Readily hydrolyzed by moisture with the liberation of hydrogen chloride. Combustible.

Intermediate for silicones.

A colorless to yellow liquid with a pungent odor. Amyltrichlorosilane (mixed isomers)(Pentyltrichlorosilane) is combustible and has a flash point of 145°F. Corrosive to metals and tissue.

Chlorosilanes, such as Amyltrichlorosilane (mixed isomers)(Pentyltrichlorosilane), are compounds in which silicon is bonded to from one to four chlorine atoms with other bonds to hydrogen and/or alkyl groups. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous H2. They can serve as chlorination agents. Chlorosilanes react vigorously with both organic and inorganic acids and with bases to generate toxic or flammable gases.

Toxic and corrosive.

Inhalation causes irritation of mucous membrane. Contact of liquid with eyes or skin causes severe burns, and ingestion causes severe burns of mouth and stomach.

It is used to make silicones.

If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 minutes, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart action has stopped. Transfer promptly to a medical facility. When this chemical has been swallowed, get medical attention. If victim is conscious, administer water or milk. Do not induce vomiting.Medical observation is recommended for 24 to 48 hours after breathing overexposure, as pulmonary edema may be delayed. As first aid for pulmonary edema, a doctor or authorized paramedic may consider administering a drug or other inhalation therapy.

UN1728 Amyltrichlorosilane, Hazard class: 8; Labels: 8-Corrosive material.

Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Chlorosilanes react vigorously with bases and both organic and inorganic acids generating toxic and/or flammable gases. Chlorosilanes react with water, moist air, or steam releasing heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous hydrogen. Attacks metals in the presence of moisture.

Amyl trichlorosilane is a colorless to yellowish liquid with a sharp acrid odor (like hydrochloric acid).Molecular weight= 205.63; Boiling point= 168℃;Specific gravity= 1.137 at 25℃; Liquid surface tension= 5(estimate) 0.020 N/m at 20℃; Relative vapor density(air= 1) 5 7.1; Latent heat of vaporization= 2.02 3 105J/kg; Heat of combustion 5 2 154 3 105 J/kg; Heat ofsolution: 4.0 3 105 J/kg; Flash point= 30℃. NFPA 704 MHazard Identification (based on NFPA-704 M RatingSystem): Health 3, Flammability 2, Reactivity 2 . Reactswith water.

Color Code—White: Corrosive or ContactHazard; Store separately in a corrosion-resistant location.Prior to working with this chemical you should be trainedon its proper handling and storage. Store in tightly closedcontainers in a cool, well-ventilated area. Metal containersinvolving the transfer of this chemical should be groundedand bonded. Where possible, automatically pump liquidfrom drums or other storage containers to process containers. Drums must be equipped with self-closing valves,pressure vacuum bungs, and flame arresters. Use only nonsparking tools and equipment, especially when openingand closing containers of this chemical. Sources of ignition, such as smoking and open flames, are prohibitedwhere this chemical is used, handled, or stored in a mannerthat could create a potential fire or explosion hazard.