General Description
A clear colorless liquid with chloroform odor . Flash point 95°. Density 1.225 g/cm3 and insoluble in water. Hence sinks in water. A strong irritant. Used as a soil fumigant.
Reactivity Profile
TRANS-1,3-DICHLOROPROPENE(10061-02-6) reacts with aluminum, aluminum alloys, with other active metals and with some metal salts and halogens. Can react vigorously with oxidizing materials. .
Air & Water Reactions
Highly flammable. Insoluble in water.
Potential Exposure
Used as a soil fumigant prior to
planting crops, such as cotton, sugar beet, potatoes; used in
combinations with dichloropropanes as a soil fumigant.
Workers engaged in manufacture, formulation and application of this soil fumigant and nematocide.
Fire Hazard
Flash point data for this chemical are not available, however literature indicates that this material is flammable.
First aid
If this chemical gets into the eyes, remove any
contact lenses at once and irrigate immediately for at least
15 minutes, occasionally lifting upper and lower lids.
Seek medical attention immediately. If this chemical
contacts the skin, remove contaminated clothing and wash
immediately with soap and water. Seek medical attention
immediately. If this chemical has been inhaled, remove
from exposure, begin rescue breathing (using universal
precautions, including resuscitation mask) if breathing has
stopped and CPR if heart action has stopped. Transfer
promptly to a medical facility. When this chemical
has been swallowed, get medical attention. Give large
quantities of water and induce vomiting. Do not make an
unconscious person vomit.
Shipping
UN2047 Dichloropropene, Hazard Class: 3;
Labels: 3-Flammable liquid.
Incompatibilities
Vapor may form explosive mixture
with air. Incompatible with oxidizers (chlorates, nitrates,
peroxides, permanganates, perchlorates, chlorine, bromine,
fluorine, etc.); contact may cause fires or explosions. Keep
away from alkaline materials, strong bases, strong acids,
oxoacids, and epoxides. May accumulate static electrical
charges, and may cause ignition of its vapors. Incompatible
with strong acids; oxidizers, aluminum or magnesium compounds; aliphatic amines; alkanolamines, alkaline materials;
halogens, or corrosives. Note: Epichlorohydrin may be
added as a stabilizer.
Description
Trans-1,3-dichloropropene appears as a clear colorless liquid with chloroform odor. Flash point 95 °F. Density 1.225 g/cm3 and insoluble in water. Hence sinks in water. A strong irritant. Used as a soil fumigant. It is used as an intermediate in the manufacture of 3,3-dichloro-1-propene and other pesticides.
Chemical Properties
1,3-Dichloropropene is a colorless to strawcolored liquid. Sharp, sweet, irritating, chloroform-like odor.
Chemical Properties
colourless liquid
Waste Disposal
Incineration, preferably
after mixing with another combustible fuel. Care must be
exercised to assure complete combustion to prevent the
formation of phosgene. An acid scrubber is necessary to
remove the halo acids produced. In accordance with
40CFR165, follow recommendations for the disposal of
pesticides and pesticide containers. Must be disposed properly by following package label directions or by contacting
your local or federal environmental control agency, or by
contacting your regional EPA office. Consult with environmental regulatory agencies for guidance on
acceptable disposal practices. Generators of waste containing this contaminant (≧100 kg/mo) must conform with
EPA regulations governing storage, transportation, treatment, and waste disposal.
Physical properties
Colorless to pale yellow liquid with a chloroform-like odor. Evaporates quickly when spilled.
Uses
The isomer mixture is used as a soil fumigant and a nematocide.
Definition
ChEBI: (E)-1,3-dichloropropene is a 1,3-dichloropropene with a (E)-configuration. It has a role as a fumigant. It is a 1,3-dichloropropene and a chloroalkene. It derives from a hydride of a propene.
Environmental Fate
Biological. The isomeric mixture showed significant degradation with gradual adaptation
in a static-culture flask-screening test (settled domestic wastewater inoculum) conducted
at 25°C. At concentrations of 5 and 10 mg/L, percent losses after 4 weeks of
incubation were 85 and 84, respectively. Ten days into the incubation study, 7–19% was
lost due to volatilization (Tabak et al., 1981).
Chemical/Physical. Hydrolysis in distilled water at 25°C produced trans-3-chloro-2-
propen-1-ol and hydrochloric acid. The reported half-life for this reaction is only 2 days (Kollig, 1993; Milano et al., 1988). trans-1,3-Dichloropropylene was reported to hydrolyze
to 3-chloro-2-propen-1-ol and can be biologically oxidized to 3-chloropropenoic acid
which is further oxidized to formylacetic acid. Decarboxylation of this compound yields
carbon dioxide (Connors et al., 1990). Chloroacetaldehyde, formyl chloride and chloroacetic
acid were formed from the ozonation of dichloropropylene at approximately 23°C
and 730 mmHg. Chloroacetaldehyde and formyl chloride also formed from the reaction
of dichloropropylene and hydroxyl radicals (Tuazon et al., 1984).
The evaporation half-life of trans-1,3-dichloropropylene (1 mg/L) from water at 25°C
using a shallow-pitch propeller stirrer at 200 rpm at an average depth of 6.5 cm is 24.6
minutes (Dilling, 1977).
Emits chlorinated acids when incinerated. Incomplete combustion may release toxic
phosgene (Sittig, 1985).
Solubility in water
Miscible with acetone, benzene, carbon tetrachloride, heptane, methanol (Worthing and Hance,
1991), methylene chloride, chloroform, trichloroethylene, and 1,1,2,2-tetrachloroethane.