Димер, Парилен F

Описание

Parylene F Dimer is the solid, granular starting material used to produce parylene conformal coating films. Parylene F brings allows for parylene performance at higher operating temperatures, along with similar barrier and dielectric protection of other parylene types.

Физические свойства

TYPICAL PROPERTIES OF DEPOSITED PARYLENE F FILM
Gas Permeability, O2: 16.7 (cc*mm)/(m2*day*atm)
Short Term Service Temperature: 250℃
Continuous Service Temperature: 200℃
Coefficient of Friction (Static and Dynamic): 0.35
Rockwell Hardness: R80
Tensile Strength: 7,800 psi
Penetration Power: 30 X
Dielectric Strength @ 1 mil: 7.0 KV
USP Class VI Polymer: Yes

Использование

Parylene type materials have been widely used in electronic products, Parylene family of commercially valuable types of materials are divided into four types, respectively, Parylene N, Parylene C, Parylene F, Parylene Ht.
Parylene is applied with a vapor deposition process performed in a customized vacuum system. There is no curing involved. Typical coating thickness ranges from 2-50 microns.
Barrier layer protection for high temperature applications.
Protects devices from moisture, bodily fluids, corrosive gases, vapors, liquids and other contamination.
Waterproof electronics up to IPX8 protection level and meet requirements for IPC, MIL specs and NASA standards.
Prevents corrosion of printed circuit boards and electronic components.
Dielectric layer to protect electronics from shorts and arcing.
Thin film encapsulation is used to protect electronics from vibration or shock.
Tin whisker mitigation

преимущество

Parylene F film meets all requirements of MIL-I-46058C, IPC-CC-830B and NASA-STD-8739.1 as type XY
USP Class VI biocompatibility
UL-94 V-0 flammability rating
No VOC's or solvents used in deposition process
RoHS and REACH compliant
Vapor deposition has a high penetration power and is extremely conformal
Deposition occurs in a vacuum chamber occurs at room temperature and does not exert any force during deposition
No curing cycle
Excellent barrier and dielectric properties
Chemically and biologically inert
Extremely thin and lightweight coating
No outgassing, approved by NASA
Hydrophobic
Able to sterilize with all common sterilization methods

Использование в материалах

Parylene F dimer is restricted for use on Medical Devices and R&D use only.