热熔胶801B

常温型卫材结构胶801B 用 途：适用于卫生用品、纸尿裤结构固定、多功能无纺布层粘合等。 特 点：初粘性好，色泽浅，剥离强度大，抗老化性能好，对PP、PE等无纺布粘结性能佳。 技术参数：颜 色： 浅黄色透明 　　　　　　粘 度： 1000±300cps @180℃ 　　　　　　　　　　　1300±300 cps @170℃ 　　　　　　　　　　　1900±400 cps @160℃ 　　　　　　　　　　　2800±600 cps @150℃ 软化点： 73±5℃ 使用指导：建议使用温度：150℃-170℃。 　　　　　　推荐上胶方式：喷涂或刮涂。 推荐清洗方法：用清洁的矿物油在120℃下清洗，然后用同型号热熔胶冲洗，冲洗胶温不要超过170℃。 注意事项：热熔胶的粘接性能会因粘接物表面的光洁度、涂胶量而产生差异。 　　　　　　在胶机附近工作时，应穿戴好工作服和防护眼镜。 　　　　　　胶温应低于180℃以将可燃挥发物的危险降至最低。 　　　　　　在使用热熔胶时应使空气畅通，严禁一切火源。 包 装：20公斤纸箱包装。 储 存：储存于阴凉干燥环境中避免阳光直射。储存温度应低于35℃并远离火源和热源。本产品可以保存2年。 Normal Temperature Construction Adhesive 801B Application 801B is designed for construction adhesive for baby diaper & sanitary napkins, bonding various substrate, such as non-woven fabric lamination. Feature Good initial tack, light color, excellent anti-aging properties, strong peeling strength, excellent adhesion on non-woven fabric such as PP and PE etc. Appearance Yellowish, transparent Viscosity 1000±300cps @180℃ 1300±300cps @170℃ 1900±400cps @160℃ 2800±600cps @150℃ Softening point 73±5℃ Usage guidance 1. Suggested operation temperature: 150℃-170℃. 2. Suggested tooling method: hot-melt spray nozzle or blade coating systems. 3. Suggested cleaning method: Clean the equipment with mineral oil at 120℃. Then flush it with the same type adhesive below 170℃. Precautions 1.The property of glue adhesion will differ from the different surfaces of substrate and thickness of applied adhesive. 2. Material is applied hot-appropriated clothing and eye protection should be used. 3. Please keep the adhesive below 180℃ during operation to keep the lowest danger of flammable volatiles. 4. During adhesive operation, make sure the air flow and any fire is prohibited. Package 1kg/block,each block with a release paper,20kgs in a carton. Storage 2 years in dry and cool environment below 35℃ and far from fire, unexposed to the sunlight.