基本信息 产品详情 公司简介 推荐产品
网站主页 上海丝印电镀油墨/电镀丝印油墨/电镀油墨
  • 上海丝印电镀油墨/电镀丝印油墨/电镀油墨

上海丝印电镀油墨/电镀丝印油墨/电镀油墨

Shanghai screen printing inks / plating silk screen printing ink / Plating Ink
上海 更新日期:2012-11-02

上海凯贤印刷科技有限公司(生产部)

非会员
联系人:杨紫怡
电话:021-59507952-108拨打
手机:18201845198 拨打
邮箱:2130919020@qq.com

产品详情:

中文名称:
上海丝印电镀油墨/电镀丝印油墨/电镀油墨
英文名称:
Shanghai screen printing inks / plating silk screen printing ink / Plating Ink

阳极氧化铝金属表面油墨
 
油墨特性:
拥有高光高色泽,主要用于金属表面、白铁表面、不锈钢表面、玻璃表面、UV表面、强化表面、电镀表面等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。
 
印刷:丝印移印均可。
 
表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内(加专用固化剂)。
 
稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。
 
测试方法(完全干燥后):
1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油;
2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色;
3、 耐磨:橡皮擦500g力水平来回擦500次。
 
使用方法:
1、使用前应充分搅拌,用后随时封闭;
2、搅拌时加开油水10-15%,稀释到印刷粘度如需自干加专用固化剂5%-10%.                                  
3、网板塞网时可用洗网水清洗;
4、不得与其它类型油墨混合使用。
 
注意事项:
1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷;
2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可;
3、环境温度过高,将会影响油墨原有质量;
4、根据气候变化,请远离火源,阴暗环境下存放。

 

Anodized aluminum metal surface of ink

Properties of ink:

Have a high light color, mainly used for metal surface, tin, stainless steel, glass surface surface surface surface surface, UV, aggrandizement, plating and other materials, with a high color, high color, high covering power, high stability, high alcohol and wear resistance characteristics.

Printing: screen printing can be.

Surface dry and hard work time: surface dry time natural volatile5-10 minutes; work time within 24 hours ( plus special curing agent ).

Dilution and cleaning: SV3slow dry open water, UVK1( printing open water) can be simultaneously used718washing network water cleaning.

Test method ( completely dry ):

In1,3M gummed paper painting grid ink surface,45degree angle quickly pulled off oil;

In 2,99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the surface of ink, to the level of force pulling back and forth200 times without decolorization;

3:500g force levels, wear-resistant eraser brush back and forth 500times.

Method of use:

In 1, before use should be fully stirred, use at any time after the closure of;

2, add water mixing10-15%, diluted to printing viscosity for self stem plus special curing agent5%-10%.

3, mesh plug mesh can be used when washing network water cleaning;

4, not with other types of ink mixed use.

Matters needing attention:

In 1, plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;

2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster;

In 3, the ambient temperature is too high, will affect the quality of the original ink;

In 4, according to the climate change, please stay away from fire, dark environment storage.

丝印电镀油墨/电镀丝印油墨/电镀油墨系列

成立日期
注册资本
员工人数
年营业额
经营模式
主营行业

上海丝印电镀油墨/电镀丝印油墨/电镀油墨相关厂家报价

内容声明
拨打电话 立即询价