上海丝印电镀油墨/电镀丝印油墨/电镀油墨

Anodized aluminum metal surface of ink

Properties of ink:

Have a high light color, mainly used for metal surface, tin, stainless steel, glass surface surface surface surface surface, UV, aggrandizement, plating and other materials, with a high color, high color, high covering power, high stability, high alcohol and wear resistance characteristics.

Printing: screen printing can be.

Surface dry and hard work time: surface dry time natural volatile5-10 minutes; work time within 24 hours ( plus special curing agent ).

Dilution and cleaning: SV3slow dry open water, UVK1( printing open water) can be simultaneously used718washing network water cleaning.

Test method ( completely dry ):

In1,3M gummed paper painting grid ink surface,45degree angle quickly pulled off oil;

In 2,99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the surface of ink, to the level of force pulling back and forth200 times without decolorization;

3:500g force levels, wear-resistant eraser brush back and forth 500times.

Method of use:

In 1, before use should be fully stirred, use at any time after the closure of;

2, add water mixing10-15%, diluted to printing viscosity for self stem plus special curing agent5%-10%.

3, mesh plug mesh can be used when washing network water cleaning;

4, not with other types of ink mixed use.

Matters needing attention:

In 1, plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;

2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster;

In 3, the ambient temperature is too high, will affect the quality of the original ink;

In 4, according to the climate change, please stay away from fire, dark environment storage.