上海耐强碱金属油墨/金属耐强碱油墨/金属油墨

Baking free stem from the metal ink series

Properties of ink:

With high gloss and high color, mainly used for metal surface, the surface of the surface of stainless steel, iron, glass surface, UV surface, enhanced surface, plating and other materials, with a high color, high color, high covering power, high stability, high alcohol and rub characteristics.

Printing: screen printing can be.

Surface drying and drying time: surface dry time natural volatile 5-10 minutes; work time within 24 hours ( with special curing agent).

Dilution and cleaning: SV3 slow dry open water, UVK1 ( printing open water) can be simultaneously used 718 washing network water cleaning.

Test method ( completely dry ):

In 1, 3M gummed paper in paintings of the surface of the ink, 45 degree angle quickly pulled off the oil;

In 2, 99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, with a horizontal force pulling back and forth 200 times without decolorization;

3: 500g force levels, wear-resistant eraser brush back and forth 500 times.

Method of use:

In 1, before use should be fully stirred, use at any time after the closure of;

2, add water mixing 10-15%, diluted to printing viscosity for self stem plus special curing agent 5%-10%.

3, mesh plug mesh used when washing network water cleaning;

4, not with other types of ink mixing.

Matters needing attention:

1, plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;

2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster;

In 3, the ambient temperature is too high, will influence the quality of the original ink;

In 4, according to climate change, please stay away from fire, dark environment storage.