LH113-2 CO High Temperature Shift Catalyst

北京更新日期：2012-07-21

Pingxiang Lihua Packing Co.,Ltd.

非会员

联系人：Sufen Chen

电话：0799-6886563拨打

邮箱：sufen-chen@hotmail.com

产品详情:

中文名称：: LH113-2 CO High Temperature Shift Catalyst

英文名称：: LH113-2 CO High Temperature Shift Catalyst

LH113-2 CO High Temperature Shift Catalyst

1. Feature and application

LH113-2 CO High Temperature Shift Catalyst is suitable for CO shift process of energy saving type used in synthetic ammonia and hydrogen plants etc. under low steam/gas ratio condition.

As a new generation energy saving catalyst, it has not only the complete features of high operating strength, wide-range temperature, good low temperature activity, low sulfur content in the mass, no special time arranged for sulfur releasing and better steam condensation resistance, but also is more suitable for low steam/gas ratio condition and efficiently inhibit the Fischer-Tropsch reaction.

Catalyst LH113-2 is used to CO contained in shift rich hydrogen flow under the low steam/gas ratio.

More hydrogen can be produced through the following reaction:

CO+H₂O=CO₂+H₂+41.19KJ/mol

It can also purify the hydrogen at the same time.

Outstanding features:

1. During the reduction, the particles of the catalyst varied in visual volume are hardly caused. Thus ensure strength of operation and long life of the catalyst after reduction.

2. The high selection of the catalyst can increase low temperature activity of Fe-Cr HT shift catalyst, traditionally taking Fe₂O₃as active component.

2. Chemical and physical parameter

▼

▲

Item

Value

Fe₂O₃, wt%

>74

Cr₂O₃, wt%

Graphite, wt%

Other additives, wt%

Define amount

S, WT%