固体聚氯化铁（PFC），高效高分子铁系混凝剂

固体聚氯化铁（PFC），高效高分子铁系混凝剂。

产品指标 总铁：38%～43% 盐基度：50%～60% 形态：固体粉末 / 颗粒

对比传统三氯化铁痛点 液体三氯化铁（Fe 38~40%）：有效组分占比低，单位处理量运输量大，配套储罐、泵管投资高，低温环境容易结冰，冬季使用受限。

六水三氯化铁固体（Fe≈20.6%）：铁含量偏低，熔点约 37℃，极易吸潮、软化流淌，仓储、运输全程要求≤15℃冷链，物流与库存管理成本高，损耗风险大。

固体 PFC 核心优势 高铁指标，38~43% 高含铁，同等处理量下用量更少，物流成本显著下降。 储存友好，常温密封条件下抗吸潮性能优异，无需冷链运输、冷藏仓储，解决六水三氯化铁融化结块难题。 溶解性能好，入水溶解速度快，配制溶液简单，现场操作稳定。 聚合态结构，自带盐基度，相比三氯化铁酸度更低，设备腐蚀更小，矾花致密、沉降速度快，除磷、脱色、去除悬浮物、重金属表现稳定。 兼容性强，可直接对标替换现有三氯化铁客户，也可给 PAC 客户做性能升级对比，市政污水、印染、电镀、线路板、化工废水均可应用。

有兴趣，请联系TRACY陈小姐13927337010，tracy.chen@hz3r.com

Solid Poly Ferric Chloride (PFC), high efficiency polymeric iron-based coagulant.

Product Specifications Total Iron: 38%～43% Basicity: 50%～60% Form: solid powder / granule

Problems of traditional ferric chloride Liquid ferric chloride (Fe 38~40%): low proportion of effective components, large shipment volume for equal treatment capacity, high investment on storage tanks and pipelines, easy freezing under low temperature, limited application in winter.

Ferric chloride hexahydrate solid (Fe≈20.6%): low iron content, melting point around 37℃, highly hygroscopic and prone to softening and flowing. Cold chain below 15℃ is required throughout storage and transport, leading to high logistics and inventory cost and high loss risk.

Core advantages of solid PFC High iron content at 38~43%. Less dosage for same treatment load, logistics cost reduces obviously. Easy storage. Good anti-hygroscopic property under sealed ambient condition. Cold chain transport and cold storage are not needed. It solves the melting and caking problem of ferric chloride hexahydrate. Good solubility. Fast dissolution in water, simple solution preparation and stable onsite operation. Polymeric structure with basicity. Lower acidity and less equipment corrosion compared with ferric chloride. It generates compact and fast-settling flocs, and delivers stable effect on phosphorus removal, decolorization, suspended solid and heavy metal removal. Wide compatibility. It can directly replace ferric chloride for existing users, or serve as an upgraded alternative for PAC customers. Applicable to municipal wastewater, textile, electroplating, PCB and chemical wastewater.