供应 伊斯曼氢化松香醇 原装进口ABITOL-E CAS: 13393-93-6

Technical Data Sheet

Abitol E Hydroabietyl Alcohol

Product Description

Abitol E Resin hydroabietyl alcohol is a colorless, tacky, balsamic resin. Its tackiness and extremely pale color, combined with its solubility in common organic solvents and compatibility with resins, film-formers, and oils, have led to its use as a resinous plasticizer and/or tackifier in plastics, lacquers, inks and adhesives. Chemically, Abitol E Resin is a high molecular weight, primary, monohydric alcohol derived from rosin acids that have been hydrogenated to reduce unsaturation. Abitol E Resin undergoes the general types of chemical reaction common to most primary alcohols.

Typical Properties

Property

Typical Value, Units

Ring and Ball Softening Point     

Liquid 

Color, Gardner     

1 - Neat Molten 

Color, Hunterlab b   a  

2 

Acid Number (mg KOH/g)     

0.1 

Hydroxyl Number     

4.7%

Saponification Number   b  

22 mg KOH/g

Hydroabietyl Alcohol     

81%

Refractive Index  

1.5245 

1.4950 

Specific Gravity    @ 25°C/25°C 

1.008 

Melt Viscosity  

6500 cP

1500 cP

160 cP

Description, Base Resin     

Hydrogenated Gum Rosin 

a  5 cm path length, 50% in toluene; Illuminant C, 2 degree observer
b  Rosin based

Compatibility and Solubility

Compatible at all ratios, or in limited but practically useful proportions, with nitrocellulose, ethylcellulose, melamine- and urea-formaldehyde resins, polyethylene, shellac and carnauba wax. Limited compatiblity with casein, polymethyl methacrylate, polyvinyl acetate chloride, polyvinyl butyral, natural rubber, synthetic rubber. Incompatible with cellulose acetate, cellulose acetate butyrate, polystyrene and zein.

Soluble in alcohols, esters, ketones, chlorinated solvents, and aliphatic, aromatic, or terpene hydrocarbons. Insoluble in water. Solubility parameters, 50% resin concentration: 7,0-10,6 in Class I solvents - weakly hydrogen-bonded; 7,4-11,3 in Class II solvents - moderately hydrogen-bonded; 9,5-14,5 in Class III solvents - strongly hydrogen-bonded.

Packaging

Abitol E Hydroabietyl Alcohol is supplied in 190 kg open-head steel drums, on pallets containing 4 drums each, from production facilities in The Netherlands and from warehouses located in Europe.

Storage

Inside storage and "first in first out" inventory control is recommended. Storage at temperatures above 30°C should be avoided. Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.

Abitol E Hydroabietyl Alcohol material will remain within product specification limit for a period of at least twelve months after shipment from  production facilities in the Netherlands, provided storage conditions outlined in this data sheet are observed. However, as we can neither anticipate the conditions under which the resin is processed, nor the end use applications for which it is used, we recommend that the material be tested upon receipt.