基本信息 产品详情 公司简介 推荐产品
网站主页 RhoNox-1 化合物 RhoNox-1
  • 化合物 RhoNox-1|T87330|TargetMol

化合物 RhoNox-1|T87330|TargetMol

RhoNox-1
1150 1mg 起订
上海 更新日期:2026-05-08

TargetMol 中国(陶术生物)

VIP1年
联系人:邵经理
电话:400-821-0310拨打
手机:15002144251 拨打
邮箱:xuexiang.shao@tsbiochem.com

产品详情:

中文名称:
化合物 RhoNox-1
英文名称:
RhoNox-1
CAS号:
1447815-38-4
品牌:
TargetMol
产地:
美国
保存条件:
Keep away from direct sunlight Powder: -20°C for 3 years | In solvent: -80°C for 1 year Shipping with blue ice/Shipping at ambient temperature.
纯度规格:
97.34%
产品类别:
抑制剂
货号:
T87330

Product Introduction

Bioactivity

名称RhoNox-1
描述RhoNox-1 is a divalent iron ion (Fe²⁺) fluorescent probe specific and available for use in living cells, with a maximum absorption wavelength of 540 nm and a maximum emission wavelength of 575 nm, producing an irreversible orange-red fluorescent product. RhoNox-1 has the advantage of cell membrane permeability and is usually localized to the c.
体外活性使用方法 一、溶液配置 1.母液的配置:使用DMSO将RhoNox-1 进行配置并得到 10 mM 储备液。 注意事项:请您根据您的实验需求自行调整母液的浓度,母液分装存放于-80℃或者-20℃,避免反复冻融。 2. 工作液的配制:用预热好的无血清细胞培养基或 PBS 稀释储存液,配制成 1-10 μM 的 RhoNox-1 工作液。 注意事项:请您根据实际情况调整 RhoNox-1 工作液浓度,且现用现配。 二、细胞染色 1.贴壁细胞 1)将贴壁细胞培养于无菌盖玻片上。 2)从培养基中移出盖玻片,吸除多余培养基。 3)加入 100μL 染料工作液,轻轻晃动使其完全覆盖细胞,室温孵育5-30 分钟。 4)吸去染料工作液,用培养基洗 2-3 次,每次 5 分钟 ,使用荧光显微镜或流式细胞仪进行观察。 2.悬浮细胞 1)悬浮细胞:离心收集细胞,加入 PBS 洗涤两次,每次 5 分钟。细胞密度在1×106/mL 2)加入 1 mL工作液,室温孵育 5-30 分钟。 3)400 g,离心 3-4 分钟,弃去上清。 4)加入 PBS 洗涤细胞两次,每次 5 分钟。 5)用 1 mL 无血清培养基或 PBS 重悬细胞后,使用荧光显微镜或流式细胞仪进行观察。 以上信息均来源于已发表文献,具体实验方案请根据实际研究需求进行适当调整。
存储条件Keep away from direct sunlight Powder: -20°C for 3 years | In solvent: -80°C for 1 year Shipping with blue ice/Shipping at ambient temperature.
溶解度DMSO : 80 mg/mL (174.08 mM), Sonication is recommended.
br
RhoNox-1|TargetMol

公司简介


成立日期 (14年)
注册资本 589.8595万人民币
员工人数 100-500人
年营业额 ¥ 1亿以上
经营模式 贸易,工厂,试剂,定制,服务
主营行业 天然产物,生物化工,化学试剂,生物技术服务

化合物 RhoNox-1相关厂家报价

内容声明
拨打电话 立即询价