2. Excellent hardness and abrasion/impact resistance
3. Available colors
4. Health and Environmental Protection
5. Consistent color and appearance of the product
6. Best corrosion resistance
7. Prolonged exposure to sunlight
8. The ability to survive in highly corrosive environments
9. Flexibility to allow forming after coating
10. High durability
11. Resistance to chipping
Application:
This type of product specially designed for surface coating of all metal materials such as construction aluminium profile, indoor metal furnitures, pipes, crust of air conditioner, wires or can be used on the surface coating of other metal work etc.
Testing Conditions:
Checked under laboratory conditions. Actual product performance may vary due
to product specific properties such as gloss, color, effect and finish as well as
application related and environmental influences.
Substrate: Iron sheet
Pretreatment: Zinc Phosphating
Recommended Film Thickness: 50-70um
Curing Condition: 200°C 10min. / 180°C 15min.
▼
▲
Propeties
Tests
Test Method
Test Result
Physical
Flexibility
BS3900-E11
3mm max.
Cross Cut Test
BS3900-E6
(1mm width)
0 class
Cupping Test
BS3900-E4
7mm Good
Pencil Hardness
ASTM D3363
>= 1H
Impact Test
ASTM D2794
>= 50 cm·kg
Chemical
Salt Spray Test
ASTM B117
(500h)
2mm max.
Determination of resistance to Humidity
BS3900-F2
(1000h)
No blistering or loss of gloss
Soaked in distilled water Test
BS3900-F7
(240h)
No blistering or loss of gloss
Anti-chemicals
(tested by normal acid, alkali,
oil, solvents under room tempeture.)
Good
Note of Pretreatment: All the steel substrate should be degreased, the ferrous
metals should be zinc or iron phosphating, aluminum recommended
chromating, to improve corrosion resistance.
Coating Method:
JC200 series powder can be coated by manual or auto electrostatic spray guns.
(or a tribostatic process as for option). it can be cycle used with a proper recycle system.
Health & Safety:
1.No hazardous ingredient.
2.No hazardous gas.
3.The inhalation of dusts should be avoided. An operator should wear an anti-dust mask and try best to avoid long time contact with the powder coatings.
4.The coatings stacked on the skin could be washed with soap.
5.Requirement of environment protection: the product doesn’t include arsenic, selenium, lead, hexavalent chromium, mercury, stibium, cadmium and other heavy non-ferrous metals and is in fully conformity with requirement of RoHS environment protection.
Plant & Package:
1.Carton lined with PE bag
2.Net weight 20kg per carton
3.Carton size:37cm*28cm*33cm
4.A 20ft container could load 15tons
Transportation & Storage:
a) Below 25°C
b) In dry, venting, clean indoor
c) Keep away from fire and heating
d) With coverage
e) If the stored time is more than 6 month, it must be tested before use
