AU-10 isused for oil and gas well acidizing fluid, as a corrosion inhibitor on the protective equipment and pipelines. For hydrochloric acid, soil acid, emulsified acid, acid micelles, and other types of acid, temperature 130 ℃,with other additives through the complex, up to 180 ℃.
Specification:
(1) Appearance: red brown transparent liquid;
(2) Density: (20 ℃) g/cm3: 1.01 ~ 1.03;
(3) Freezing point (℃): ≤ -10;
(4) Solubility: soluble in water, salt, acid and so on.
Usage:
AU-10 directly added to the water, then add concentrated acid mix; can also be directly added to dilute or concentrated acid, the mixing can, using a concentration of 1.0 ~ 3.0% (V).
Note that when used, should wear goggles and rubber gloves to avoid the face, hands and other parts of the skin in direct contact, if splashed on skin, wash with water in time, and wash with soap.酸腐蚀抑制剂是在石油和天然气井中用于保护性设备和管道的抗酸剂,主要对抗盐酸,土壤酸性,乳化酸,酸微粒和其他形式的酸。
(1)外观:红褐色透明液体
(2)密度:(20 ℃) g/cm3: 1.01 ~ 1.03;
(3)凝固点:(℃): ≤ -10;
(4)溶解性:在水、盐溶液、酸等等可溶
用法:
AU-10直接添加到水中,然后添加浓酸混合物;或者直接加稀释或浓酸。当使用时,应当佩戴护目镜和橡胶手套,避免面部,手和其他皮肤与其直接接触。如果溅到皮肤上,及时用水清洗,然后用肥皂清洗。
acid corrosion inhibitor;AU-10