Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 4-Aminopyridine > 4-Aminopyridine(504-24-5)

4-Aminopyridine(504-24-5)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
4-Aminopyridine
Synonyms
4-Aminopyridine
CAS
504-24-5
Formula
C5H6N2
Molecular Weight
94.12
EINECS
207-987-9
RTECS
US1750000
RTECS Class
Agricultural Chemical and Pesticide; Human Data
Merck
13,3964
Beilstein/Gmelin
105782
Beilstein Reference
5-22-09-00106
EC Class
very toxic, irritant

Physical and Chemical Properties

Appearance
White crystalline material with no odor.
Solubility in water
72 g/L
Melting Point
157 - 160
Boiling Point
273
Vapor Pressure
.8
Density
1.25 g/cm3
pKa/pKb
4.83 (pKb)
Partition Coefficient
-.76
Heat Of Vaporization
90.02 kJ/mol
Heat Of Combustion
-2864 kJ/mol
Usage
Avicide.

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Poison room locked.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Avoid contact with heat, sparks and flame. Do not ingest or inhale. Use only in a chemical fume hood.

Hazards Identification

Inhalation
Inhalation of high concentrations may cause central nervous system effects characterized by headache, dizziness, unconsciousness and coma. Causes respiratory tract irritation. May cause severe headaches, nausea, increased blood pressure, weakness, convulsions, and a stuporous state.
Skin
Causes skin irritation. May be fatal if absorbed through the skin. Substance is rapidly absorbed through the skin. Causes symptoms similar to those of inhalation. Causes redness and pain.
Eyes
Causes eye irritation. Causes redness and pain.
Ingestion
May be fatal if swallowed. May cause irritation of the digestive tract. Poison by ingestion. May cause effects similar to those for inhalation exposure. An oral dose of 590 mg/kg of 4-aminopyridine in a man produced shortness of breath, nausea, vomiting, hallucinations and distorted perception. Affects the CNS to produce tremor, excitability and convulsions.
Hazards
Material may produce irritating or poisonous gases in fire. Runoff from fire control water may give off irritating or poisonous gases.
EC Risk Phrase
R 28 23/24 33 36/37/38 51/53
EC Safety Phrase
S 26 28 36/37/39 45 61
UN (DOT)
2671

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Exposure Effects
Weakness, dizziness, disorientation, hyperexcitibility, tremors, periorbital paresthesias and tonic-clonic seizures may be noted.
Poison Class
2

Fire Fighting Measures

Flash Point
164
Autoignition
640
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Containers may explode in the heat of a fire. Combustible solid. To extinguish fire use water spray, dry chemical, carbon dioxide, or chemical foam.
Fire Potential
Some of these materials may burn but do not ignite readily.

Accidental Release Measures

Small spills/leaks
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Remove all sources of ignition. Provide ventilation.

Stability and Reactivity

Disposal Code
9
Incompatibilities
Oxidizing agents, strong acids, acid chlorides, acid anhydrides
Stability
Stable under normal temperatures and pressures.
Decomposition
Nitrogen oxides, carbon monoxide, carbon dioxide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
2671
Hazard Class
6.1
Packing Group
II
HS Code
2933 39 99
Contact More