Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Butyraldehyde oxime > Butyraldehyde oxime(110-69-0)

Butyraldehyde oxime(110-69-0)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Butyraldehyde oxime
Synonyms
Butyraldehyde oxime
CAS
110-69-0
Formula
C4H9NO
Molecular Weight
87.14
EINECS
203-792-8
RTECS
ES3500000
RTECS Class
Tumorigen; Mutagen
Beilstein/Gmelin
1698799
Beilstein Reference
4-01-00-03234
EC Index Number
616-013-00-5
EC Class
Toxic; Harmful; Irritant

Physical and Chemical Properties

Appearance
Colorless liquid.
Solubility in water
Insoluble
Melting Point
-29.5
Boiling Point
152
Density
0.906 g/cm3 (20 C)
Partition Coefficient
.89
Usage
Used to make plastics and rubber.
Vapor Density
3.01
Refractive Index
1.43358 (20 C)

First Aid Measures

Ingestion
DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.
Inhalation
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.
Skin
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
Eyes
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

Handling and Storage

Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

Hazards Identification

Inhalation
Vapors may cause dizziness or suffocation. May cause irritation or burns.
Skin
May cause irritation or burns.
Eyes
See Skin.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. May polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.
EC Risk Phrase
R 22 24 36
EC Safety Phrase
S 23 36 45
UN (DOT)
2840

Exposure Controls/Personal Protection

Personal Protection
Wear appropriate protective gloves, clothing and goggles.
Respirators
Wear positive pressure self-contained breathing apparatus (SCBA).
Exposure Effects
The toxological properties of this substance have not been fully investigated.
Poison Class
3

Fire Fighting Measures

Flash Point
57.8 (closed cup)
Fire Fighting
Do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use alcohol foam, dry chemical or carbon dioxide. Keep run-off water out of sewers and water sources.
Fire Potential
HIGHLY FLAMMABLE.

Accidental Release Measures

Small spills/leaks
Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Attempt to stop leak if without undue personnel hazard. Use water spray to knock-down vapors.

Stability and Reactivity

Incompatibilities
Incompatible with oxidizing materials Incompatible with metallic impurities May react with strong acids.
Stability
No data.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
2840
Hazard Class
3
Packing Group
III
Contact More