Home > 2-Bromopropiophenone > 2-Bromopropiophenone(2114-00-3)
2-Bromopropiophenone(2114-00-3)
Product Identification
Physical and Chemical Properties
First Aid Measures
Handling and Storage
Hazards Identification
Exposure Controls/Personal Protection
Fire Fighting Measures
Accidental Release Measures
Stability and Reactivity
Transport Information
Product Identification
Product Name
2-Bromopropiophenone
2-Bromopropiophenone
Synonyms
1-Benzoyl-1-bromoethane
1-Bromoethyl phenyl ketone
2-Bromo-1-phenyl-1-propanone
2-Bromo-1-phenylpropan-1-one
a-Methylphenacyl bromide
1-Benzoyl-1-bromoethane
1-Bromoethyl phenyl ketone
2-Bromo-1-phenyl-1-propanone
2-Bromo-1-phenylpropan-1-one
a-Methylphenacyl bromide
CAS
2114-00-3
2114-00-3
Formula
C9H9BrO
C9H9BrO
Molecular Weight
213.08
213.08
EINECS
218-307-5
218-307-5
RTECS
UG8400000
UG8400000
RTECS Class
Other
Other
Beilstein/Gmelin
508550
508550
Beilstein Reference
4-07-00-00684
4-07-00-00684
EC Class
irritant
irritant
Physical and Chemical Properties
Appearance
Clear yellow.
Clear yellow.
Solubility in water
Insoluble
Insoluble
Boiling Point
245
245
Density
1.439 g/cm3 (0 C)
1.439 g/cm3 (0 C)
Refractive Index
1.5717 (20 C)
1.5717 (20 C)
First Aid Measures
Ingestion
Do NOT induce vomiting. Allow the victim to rinse his mouth and then to drink 2-4 cupfuls of water, and seek medical advice.
Do NOT induce vomiting. Allow the victim to rinse his mouth and then to drink 2-4 cupfuls of water, and seek medical advice.
Inhalation
Remove from exposure to fresh air immediately.
Remove from exposure to fresh air immediately.
Skin
Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Eyes
Immediately flush with running water for at least 20 minutes.
Immediately flush with running water for at least 20 minutes.
Handling and Storage
Storage
Refrigerator (approx 4 C).
Refrigerator (approx 4 C).
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards Identification
Ingestion
Not available.
Not available.
Inhalation
Not available.
Not available.
Skin
Not available.
Not available.
Eyes
Lachrymator.
Lachrymator.
Hazards
When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.
When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.
EC Risk Phrase
R 36/37/38
R 36/37/38
EC Safety Phrase
S 26 36/37/39
S 26 36/37/39
UN (DOT)
2810
2810
Exposure Controls/Personal Protection
Personal Protection
Wear appropriate protective gloves, clothing and goggles.
Wear appropriate protective gloves, clothing and goggles.
Respirators
Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.
Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.
Fire Fighting Measures
Flash Point
> 112
> 112
Fire Fighting
Small Fires: Dry chemical, carbon dioxide or water spray. Large Fires: Dry chemical, carbon dioxide, alcohol-resistant foam or water spray.
Small Fires: Dry chemical, carbon dioxide or water spray. Large Fires: Dry chemical, carbon dioxide, alcohol-resistant foam or water spray.
Fire Potential
Combustible material: may burn but does not ignite readily.
Combustible material: may burn but does not ignite readily.
Accidental Release Measures
Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container.
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container.
Stability and Reactivity
Disposal Code
2
2
Stability
Stable under normal temperatures and pressures.
Stable under normal temperatures and pressures.
Incompatibilities
Strong oxidizing agents - strong bases.
Strong oxidizing agents - strong bases.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.
Fire may produce irritating, corrosive and/or toxic gases.
Transport Information
UN Number
2810
2810
Hazard Class
6.1
6.1
Packing Group
I; II; III
I; II; III
HS Code
2914 70 90
2914 70 90