Home > 1,1'-Oxybis(2,3,4,5,6-pentabromobenzene) > 1,1'-Oxybis(2,3,4,5,6-pentabromobenzene)(1163-19-5)
1,1'-Oxybis(2,3,4,5,6-pentabromobenzene)(1163-19-5)
Supplier Product Identification
Physical and Chemical Properties
First Aid Measures
Handling and Storage
Hazards Identification
Exposure Controls/Personal Protection
Fire Fighting Measures
Accidental Release Measures
Stability and Reactivity
Transport Information
Product Identification
Product Name
1,1'-Oxybis(2,3,4,5,6-pentabromobenzene)
1,1'-Oxybis(2,3,4,5,6-pentabromobenzene)
Synonyms
bis(Pentabromophenyl) ether
DBDPO
Decabrom
Pentabromophenyl ether
bis(Pentabromophenyl) ether
DBDPO
Decabrom
Pentabromophenyl ether
CAS
1163-19-5
1163-19-5
Formula
C12Br10O
C12Br10O
Molecular Weight
959.17
959.17
EINECS
214-604-9
214-604-9
RTECS
KN3525000
KN3525000
RTECS Class
Tumorigen; Reproductive Effector; Primary Irritant
Tumorigen; Reproductive Effector; Primary Irritant
Beilstein/Gmelin
2188438
2188438
Beilstein Reference
1-06-00-00108
1-06-00-00108
EC Class
dangerous for the environment
dangerous for the environment
Physical and Chemical Properties
Appearance
White to off-white powder with a chemical odor.
White to off-white powder with a chemical odor.
Solubility in water
Insoluble
Insoluble
Melting Point
294 - 296
294 - 296
Boiling Point
572
572
Vapor Pressure
2E-12 (25 C)
2E-12 (25 C)
Density
3.364 g/cm3 (-173 C)
3.364 g/cm3 (-173 C)
Partition Coefficient
11.45
11.45
Heat Of Vaporization
82.6 kJ/mol
82.6 kJ/mol
Usage
Decabromodiphenyl oxide is an unreactive, additive flame retardant widely used for its thermal stability and its low cost in thermoplastic resins, thermoset resins, textiles and adhesives. The major applications are in high impact polystyrene, glass reinforced thermoplastic polyester and moulding resins, low density polyethylene extrusion coatings, polypropylene (homo- and copolymers), acrylonitrile butadiene styrene rubber, nylon and polyvinyl chloride.
Decabromodiphenyl oxide is an unreactive, additive flame retardant widely used for its thermal stability and its low cost in thermoplastic resins, thermoset resins, textiles and adhesives. The major applications are in high impact polystyrene, glass reinforced thermoplastic polyester and moulding resins, low density polyethylene extrusion coatings, polypropylene (homo- and copolymers), acrylonitrile butadiene styrene rubber, nylon and polyvinyl chloride.
First Aid Measures
Ingestion
Get medical aid. Wash mouth out with water.
Get medical aid. Wash mouth out with water.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Handling and Storage
Storage
Store in a cool, dry place. Store in a tightly closed container.
Store in a cool, dry place. Store in a tightly closed container.
Handling
Minimize dust generation and accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes.
Minimize dust generation and accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes.
Hazards Identification
Inhalation
Causes respiratory tract irritation. May be harmful if inhaled.
Causes respiratory tract irritation. May be harmful if inhaled.
Skin
Causes skin irritation. May be absorbed through the skin. May be harmful if absorbed through the skin.
Causes skin irritation. May be absorbed through the skin. May be harmful if absorbed through the skin.
Eyes
Causes eye irritation. Causes redness and pain.
Causes eye irritation. Causes redness and pain.
Ingestion
May cause irritation of the digestive tract. May be harmful if swallowed.
May cause irritation of the digestive tract. May be harmful if swallowed.
EC Risk Phrase
R 40 41 53
R 40 41 53
EC Safety Phrase
S 26 36/37 61
S 26 36/37 61
UN (DOT)
3077
3077
Exposure Controls/Personal Protection
Personal Protection
Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Exposure Effects
May cause liver and kidney damage. May cause thyroid abnormalities. Possible risk of irreversible effects.
May cause liver and kidney damage. May cause thyroid abnormalities. Possible risk of irreversible effects.
Exposure limit(s)
OEL-RUSSIA:STEL 3 mg/m3
OEL-RUSSIA:STEL 3 mg/m3
Poison Class
4
4
Fire Fighting Measures
Flash Point
241
241
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Substance is noncombustible. Extinguishing media: Use extinguishing media most appropriate for the surrounding fire. Do NOT use halogenated agents.
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Substance is noncombustible. Extinguishing media: Use extinguishing media most appropriate for the surrounding fire. Do NOT use halogenated agents.
Fire Potential
This material is probably combustible.
This material is probably combustible.
Accidental Release Measures
Small spills/leaks
Vacuum or sweep up material and place into a suitable disposal container.
Vacuum or sweep up material and place into a suitable disposal container.
Stability and Reactivity
Stability
No data.
No data.
Incompatibilities
Strong oxidizing agents, fluorine, bromine, chlorine.
Strong oxidizing agents, fluorine, bromine, chlorine.
Decomposition
Carbon monoxide, carbon dioxide, hydrogen bromide, carbonyl bromide.
Carbon monoxide, carbon dioxide, hydrogen bromide, carbonyl bromide.
Transport Information
UN Number
3077
3077
HS Code
2909 30 31
2909 30 31
Contact
More
- Company Name:J & K SCIENTIFIC LTD.
- Tel:010-82848833 400-666-7788
- Fax:86-10-82849933
- WebSite:http://www.jkchemical.com
- Company Name:Meryer (Shanghai) Chemical Technology Co., Ltd.
- Tel:021-61259108 18621169109
- Fax:86-21-61259102
- WebSite:https://www.meryer.com/cn/index/
- Company Name:Alfa Aesar
- Tel:400-6106006
- Fax:021-67582001/03/05
- WebSite:http://chemicals.thermofisher.cn
- Company Name:TCI (Shanghai) Development Co., Ltd.
- Tel:021-67121386
- Fax:021-67121385
- WebSite:https://www.tcichemicals.com/CN/zh/
- Company Name:Beijing HwrkChemical Technology Co., Ltd
- Tel:010-89508211 18501085097
- Fax:010-89508210
- WebSite:http://www.hwrkchemical.com