Ethyl methacrylate(97-63-2)

Product Name
Ethyl methacrylate

Synonyms
2-Methyl-2-propenoic Acid ethyl ester
Ethyl 2-methyl-2-propenoate

CAS
97-63-2

Formula
C6H10O2

Molecular Weight
114.15

EINECS
202-597-5

RTECS
OZ4550000

RTECS Class
Drug; Mutagen; Reproductive Effector; Primary Irritant

Beilstein/Gmelin
471201

Beilstein Reference
4-02-00-01523

EC Index Number
607-071-00-2

EC Class
Highly flammable; Irritant; Sensitising

Appearance
Clear, colorless liquite with a sweet, sharp odor.

Solubility in water
15 g/L (20 C)

Melting Point
-48

Boiling Point
100

Vapor Pressure
40 (25 C)

Density
0.9158 g/cm3 (20 C)

Partition Coefficient
1.94

Heat Of Vaporization
35.9 kJ/mol

Heat Of Combustion
-3362 kJ/mol

Usage
Ethyl methacrylate is used to make polymers, which in turn are used for building, automotive, aerospace, and furniture industries.

Vapor Density
3.6

Saturation Concentration
1.8% (20 C) (calculated)

Refractive Index
1.4128 (20 C)

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Do NOT allow victim to rub or keep eyes closed.

Storage
Keep away from heat, sparks, and flame. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area. Refrigerator (approx 4 C). Do not store in metal containers. Keep away from polymerization catalysts.

Handling
Ground and bond containers when transferring material. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Use with adequate ventilation. Wash clothing before reuse. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Inhalation
Inhalation of vapors irritates the respiratory tract. Symptoms from overexposure can include coughing, chest pain, headache, drowsiness, nausea, anorexia, irritability and narcosis. Very high levels may cause pulmonary edema and death. This material has been linked to cardiac arrest and other cardiovascular problems because of its ability to lower the blood pressure.

Skin
Causes irritation to skin. Symptoms include redness, itching, and pain. May cause allergic skin reactions. May be absorbed through the skin.

Eyes
Causes eye irritation. Lachrymator.

Ingestion
Harmful if swallowed. May cause diarrhea, nausea and vomiting. Swallowing produces acute systemic effects paralleling ingestion. Ingestion has been linked to liver and kidney damage.

Hazards
Sealed containers may rupture explosively if hot. Heat can cause a violent polymerization reaction with rapid release of energy. Vapors are heavier than air and can travel to a source of ignition and flash back.

EC Risk Phrase
R 11 36/37/38 43

EC Safety Phrase
S 9 16 29 33

UN (DOT)
2277

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate gloves to prevent skin exposure. Clothing: Wear appropriate clothing to prevent skin exposure.

Respirators
If the exposure limit is exceeded and engineering controls are not feasible, a half-face organic vapor respirator may be worn for up to ten times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. A full-face piece organic vapor respirator may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. Where respirators are required, you must have a written program covering the basic requirements in the OSHA respirator standard. These include training, fit testing, medical approval, cleaning, maintenance, cartridge change schedules, etc. See 29CFR1910.134 for details.

Exposure Effects
Dental technicians using bare hands with methyl methacrylate molding putty developed changes in the nerve impulse transmission in the fingers. Repeated skin exposures may cause tingling or prickling sensation of the skin.

Poison Class
4

Flash Point
10

Autoignition
435

Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. Will be easily ignited by heat, sparks or flame. Containers may explode if exposed to fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Water may be ineffective. Water may spread fire. If water is the only media available, use in flooding amounts.

Upper exp. limit
9.2

Lower exp. limit
1.7

Fire Potential
Quite flammable. May polymerize explosively when involved in a fire.

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Scoop up with a nonsparking tool, then place into a suitable container for disposal. Remove all sources of ignition. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Disposal Code
1

Incompatibilities
Incompatible with polymerization catalysts (peroxides, persulfates) light, heat, nitric acid and other strong oxidizers, ammonia, amines, halogens and halogen compounds.

Stability
Stable at room temperature in closed containers under normal storage and handling conditions. Stable. However, it may undergo explosive polymerization if uninhibited.

Decomposition
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.

Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

UN Number
2277

Hazard Class
3

Packing Group
II

HS Code
2916 14 90