Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > Ethyl 4-amino-1-piperidinecarboxylate > Ethyl 4-amino-1-piperidinecarboxylate(58859-46-4)

Ethyl 4-amino-1-piperidinecarboxylate(58859-46-4)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity

Product Identification

Product Name
Ethyl 4-amino-1-piperidinecarboxylate
Synonyms
1-Piperidinecarboxylic acid, 4-amino-, ethyl ester
Ethyl 4-amino-1-piperidinecarboxylate
CAS
58859-46-4
Formula
C8H16N2O2
Molecular Weight
172.22
EINECS
261-472-3
Beilstein/Gmelin
388597
Beilstein Reference
5-22-08-00064

Physical and Chemical Properties

Appearance
Colorless - clear slightly yellow liquid.
Boiling Point
102
Density
1.07 g/cm3
Vapor Density
5.94
Refractive Index
1.48 (20 C)

First Aid Measures

Ingestion
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area. Keep containers tightly closed. Store in air tight containers.
Handling
Wash thoroughly after handling. Use only in a well ventilated area. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Use and store under nitrogen. Store and handle protected from air. Wash clothing before reuse. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Do not breathe vapors.

Hazards Identification

Inhalation
May cause respiratory tract irritation. Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause burning sensation in the chest.
Skin
May cause skin irritation. May cause dermatitis. May cause cyanosis of the extremities.
Eyes
May cause eye irritation. May cause chemical conjunctivitis and corneal damage.
Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Ingestion of large amounts may cause CNS depression.
EC Risk Phrase
R 36/38
EC Safety Phrase
S 26 36

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Effects may be delayed.

Fire Fighting Measures

Flash Point
78
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water. Use dry chemical, carbon dioxide, or appropriate foam.

Accidental Release Measures

Small spills/leaks
Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Stability and Reactivity

Incompatibilities
Oxidizing agents, reducing agents, acids, bases.
Stability
Stable under normal temperatures and pressures. Substance readily absorbs carbon dioxide from air.
Decomposition
Nitrogen oxides, carbon monoxide, carbon dioxide.
Contact More