Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > 4-Bromo-2-fluoroanisole > 4-Bromo-2-fluoroanisole(2357-52-0)

4-Bromo-2-fluoroanisole(2357-52-0)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity

Product Identification

Product Name
4-Bromo-2-fluoroanisole
Synonyms
4-Bromo-2-fluoro-1-methoxybenzene
Benzene, 4-bromo-2-fluoro-1-methoxy-
CAS
2357-52-0
Formula
C7H6BrFO
Molecular Weight
205.02
EINECS
219-096-2
Beilstein/Gmelin
3240714
Beilstein Reference
4-06-00-01057

Physical and Chemical Properties

Appearance
Clear very slight yellow liquid.
Solubility in water
Insoluble
Melting Point
16
Boiling Point
215
Vapor Pressure
0.22 (25 C)
Density
1.59 g/cm3
Partition Coefficient
3.16
Heat Of Vaporization
43.3 kJ/mol
Vapor Density
7.07
Refractive Index
1.54 (20 C)

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation.

Hazards Identification

Inhalation
Causes respiratory tract irritation. Can produce delayed pulmonary edema.
Skin
Causes skin irritation.
Eyes
Causes eye irritation. May cause chemical conjunctivitis.
Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
EC Risk Phrase
R 36/38
EC Safety Phrase
S 26 36

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Exposure Effects
Effects may be delayed.

Fire Fighting Measures

Flash Point
98
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation.

Stability and Reactivity

Incompatibilities
Oxidizing agents.
Stability
Stable at room temperature in closed containers under normal storage and handling conditions.
Decomposition
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride, hydrogen bromide.
Contact More