Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > N-Isopropylmethylamine > N-Isopropylmethylamine(4747-21-1)

N-Isopropylmethylamine(4747-21-1)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
N-Isopropylmethylamine
Synonyms
N,1-Dimethylethylamine
N-Isopropyl-N-methylamine
N-Methyl-2-propanamine
N-Methyl-N-(1-methylethyl)amine
N-Methyl-N-isopropylamine
N-Methylpropan-2-amine
CAS
4747-21-1
Formula
C4H11N
Molecular Weight
73.14
EINECS
225-266-7
Beilstein/Gmelin
1719174
Beilstein Reference
4-01-00-02543

Physical and Chemical Properties

Solubility in water
Very soluble
Melting Point
-101
Boiling Point
50 - 51
Vapor Pressure
384 (25 C)
Density
0.7085 g/cm3 (20 C)
pKa/pKb
10.76 (pKb)
Partition Coefficient
.45
Heat Of Vaporization
30.9 kJ/mol
Refractive Index
1.4325 (20 C)

First Aid Measures

Ingestion
Seek medical assistance.
Inhalation
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult.
Skin
Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush with running water for at least 20 minutes. Wash skin with soap and water.
Eyes
In case of contact with substance, immediately flush with running water for at least 20 minutes.

Handling and Storage

Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

Hazards Identification

Ingestion
May cause toxic effects.
Inhalation
Vapors may cause dizziness or suffocation. May cause toxic effects.
Skin
Contact with substance may cause severe burns.
Eyes
See Skin.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
UN (DOT)
2733

Exposure Controls/Personal Protection

Personal Protection
Wear appropriate protective gloves, clothing and goggles.
Respirators
Wear positive pressure self-contained breathing apparatus (SCBA).

Fire Fighting Measures

Flash Point
-32
Fire Fighting
Small Fires: Dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Large Fires: Water spray, fog or alcohol-resistant foam.
Fire Potential
Flammable/combustible material. May be ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Make no contact with the spilled material. Fully encapsulating, vapor protective clothing should be worn for spills and leaks with no fire. ELIMINATE all ignition sources and ground all equipment. Stop leak if you can do it without risk. A vapor suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean non-sparking tools to collect absorbed material.

Stability and Reactivity

Stability
No data.
Combustion Products
Fire will produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
2733
Hazard Class
3
Packing Group
I; II; III
Contact More