Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 4-Fluorophenyl isocyanate > 4-Fluorophenyl isocyanate(1195-45-5)

4-Fluorophenyl isocyanate(1195-45-5)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
4-Fluorophenyl isocyanate
Synonyms
4-Fluoroisocyanatobenzene
Benzene, 1-fluoro-4-isocyanato-
p-Fluorobenzene isocyanate
p-Fluorophenyl isocyanate
CAS
1195-45-5
Formula
C7H4FNO
Molecular Weight
137.11000000000001
EINECS
214-799-0
Beilstein/Gmelin
471609

Physical and Chemical Properties

Appearance
Clear light amber to yellow liquid.
Solubility in water
Insoluble
Boiling Point
42 - 47 (1 torr)
Density
1.206 g/cm3
Refractive Index
1.51 (20 C)

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. SPEED IS ESSENTIAL. A DOCTOR MUST BE NOTIFIED AT ONCE.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage
Keep away from sources of ignition. Store in a cool, dry place. Store in a tightly closed container. Refrigerator/flammables.
Handling
Wash thoroughly after handling. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Use only in a chemical fume hood. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Inhalation
At high concentrations, isocyanates affect mucous membranes of the respiratory tract and may lead to fatal pulmonary edema. Vapor or mist is irritating to the mucous membranes and upper respiratory tract.
Skin
Causes skin irritation. Organic isocyanates can cause local irritation and allergic reactions.
Eyes
Vapors cause eye irritation. Lachrymator.
Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Ingestion may result in symptoms similar to cyanide poisoning which is characterized by aspyhxiation.
Hazards
Vapors form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may travel to source of ignition and flash back. Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff.
EC Risk Phrase
R 10 23/25 36/37/38 42
EC Safety Phrase
S 23 26 36/37/39 45
UN (DOT)
3080

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Exposure Effects
Repeated exposure may cause sensitization dermatitis. Repeated exposure may cause allergic respiratory reaction (asthma).

Fire Fighting Measures

Flash Point
52
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Do NOT use water directly on fire. Use carbon dioxide or dry chemical.
Fire Potential
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Wash area with soap and water. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

Stability and Reactivity

Stability
Stable under normal temperatures and pressures.
Incompatibilities
Strong oxidizing agents, acids, strong bases, alcohols, amines.
Decomposition
Hydrogen cyanide, nitrogen oxides, carbon monoxide, carbon dioxide, hydrogen fluoride.
Combustion Products
Fire will produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
3080
Hazard Class
6.1
Packing Group
II
Contact More