Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 1-Bromo-4-methylpentane > 1-Bromo-4-methylpentane(626-88-0)

1-Bromo-4-methylpentane(626-88-0)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
1-Bromo-4-methylpentane
Synonyms
4-Methylpentyl bromide
Isohexyl bromide
Isopentylmethyl bromide
NSC 159166
CAS
626-88-0
Formula
C6H13Br
Molecular Weight
165.07
EINECS
210-968-8

Physical and Chemical Properties

Solubility in water
0.10 g/L (25 C)
Melting Point
-71
Boiling Point
146
Vapor Pressure
5.6 (25 C)
Density
1.134 g/cm3 (25 C)
Partition Coefficient
3.62
Heat Of Vaporization
36.86 kJ/mol
Refractive Index
1.4494 (25 C)

First Aid Measures

Ingestion
If swallowed, wash out mouth with water provided person is conscious. Call a physician.
Inhalation
If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen.
Skin
In case of contact, immediately wash skin with soap and copious amounts of water. Remove contaminated clothing and shoes. Call a physician.
Eyes
In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician.

Handling and Storage

Storage
Keep tightly closed. Keep away from heat and open flame. Store in a cool dry place.

Hazards Identification

Inhalation
Material may be irritating to mucous membranes and upper respiratory tract.
Skin
May cause irritation.
Eyes
May cause irritation.
Hazards
Emits toxic fumes under fire conditions.
EC Risk Phrase
10
EC Safety Phrase
16 36
UN (DOT)
1993

Exposure Controls/Personal Protection

Personal Protection
Compatible chemical-resistant gloves. Chemical safety goggles. Protective clothing.
Respirators
Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the so means of protection, use a full-face supplied air respirator.
Exposure Effects
May be harmful by inhalation, ingestion, or skin absorption.

Fire Fighting Measures

Flash Point
44
Fire Fighting
Extinguish with water spray, carbon dioxide, dry chemical powder or appropriate foam. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Fire Potential
Combustible liquid.

Accidental Release Measures

Small spills/leaks
Absorb on sand or vermiculite and place in closed containers for disposal. Ventilate area and wash spill site after material pickup is complete.

Stability and Reactivity

Incompatibilities
Strong oxidizing agents.
Decomposition
Oxides of carbon, hydrogen bromide gas.

Transport Information

UN Number
1993
Hazard Class
3
Packing Group
III
Contact More