Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Benzeneacetyl chloride > Benzeneacetyl chloride(103-80-0)

Benzeneacetyl chloride(103-80-0)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Benzeneacetyl chloride
Synonyms
Phenacetyl chloride
CAS
103-80-0
Formula
C8H7ClO
Molecular Weight
154.6
EINECS
203-146-5
RTECS
AO7000000
Beilstein/Gmelin
742254
Beilstein Reference
4-09-00-01631
EC Class
corrosive

Physical and Chemical Properties

Appearance
A colorless volatile liquid with a strong odor.
Solubility in water
Insoluble
Melting Point
91
Boiling Point
206 - 211
Vapor Pressure
0.1 (25 C)
Density
1.1682 g/cm3 (20 C)
Partition Coefficient
2.23
Heat Of Vaporization
45.5 kJ/mol
Vapor Density
5.33
Refractive Index
1.5325 (20 C)

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Refrigerator (approx 4 C). Store protected from moisture.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Do not allow contact with water. Use only in a chemical fume hood. Discard contaminated shoes. Keep from contact with moist air and steam.

Hazards Identification

Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. The toxicological properties of this substance have not been fully investigated.
Inhalation
May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema. Causes chemical burns to the respiratory tract. The toxicological properties of this substance have not been fully investigated.
Skin
Causes skin burns.
Eyes
Causes eye burns.
Hazards
Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff. When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may travel to source of ignition and flash back. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water.
EC Risk Phrase
R 34 37
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
2577

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Fire Fighting Measures

Flash Point
102
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will react with water to form toxic and corrosive fumes. Extinguishing media: Use water spray to cool fire-exposed containers. Do NOT get water inside containers. Do NOT use straight streams of water. Most foams will react with the material and release corrosive/toxic gases. Use dry chemical or carbon dioxide.
Fire Potential
May burn but does not ignite readily.

Accidental Release Measures

Small spills/leaks
Clean up spills immediately, using the appropriate protective equipment. Provide ventilation. Do not get water inside containers. Cover with dry earth, dry sand, or other non-combustible material followed with plastic sheet to minimize spreading and contact with water.

Stability and Reactivity

Disposal Code
11
Stability
Moisture sensitive.
Incompatibilities
Strong oxidizing agents, strong bases, alcohols, moisture.
Decomposition
Hydrogen chloride, phosgene, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Combustion Products
Fire will produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
2577
Hazard Class
8
Packing Group
II
HS Code
2916 39 00
Contact More