Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Hazards Identification
Home > N-(3,4-Dichlorophenyl)-N'-(4-chlorophenyl)urea > N-(3,4-Dichlorophenyl)-N'-(4-chlorophenyl)urea(101-20-2)

N-(3,4-Dichlorophenyl)-N'-(4-chlorophenyl)urea(101-20-2)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Hazards Identification

Product Identification

Product Name
N-(3,4-Dichlorophenyl)-N'-(4-chlorophenyl)urea
Synonyms
3,4,4'-Trichlorocarbanilide
Cutisan
Genoface
N-(4-Chlorophenyl)-N'-(3,4-dichlorophenyl)urea
Procutene
CAS
101-20-2
Formula
C13H9Cl3N2O
Molecular Weight
315.58999999999997
EINECS
202-924-1
RTECS
FE1250000
RTECS Class
Agricultural Chemical and Pesticide
Merck
12,9786
Beilstein/Gmelin
2814890
Beilstein Reference
4-12-00-01265

Physical and Chemical Properties

Appearance
Fine white plates or white powder.
Solubility in water
Insoluble
Melting Point
255.2 - 256
pKa/pKb
12.77 (pKa)
Usage
Disinfectant.

First Aid Measures

Ingestion
DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.
Inhalation
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.
Skin
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
Eyes
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

Handling and Storage

Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

Exposure Controls/Personal Protection

Personal Protection
Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
Respirators
Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter.
Exposure Effects
The toxicological properties of this material have not been investigated.
Poison Class
4

Fire Fighting Measures

Fire Fighting
Fires involving this material can be controlled with a dry chemical, carbon dioxide, foam or Halon extinguisher. A water spray can also be used.

Accidental Release Measures

Small spills/leaks
If a spill of this chemical occurs, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with acetone and transfer the dampened material to a suitable container. Use absorbent paper dampened with acetone to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

Stability and Reactivity

Stability
No data.
Incompatibilities
Organic amides/imides react with azo and diazo compounds to generate toxic gases Flammable gases are formed by the reaction of organic amides/imides with strong reducing agents Can react as acids.

Hazards Identification

Hazards
The flash point of this material has not been determined. It is, however, probably combustible.
Contact More