Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > alpha-Chloro-p-fluorotoluene > alpha-Chloro-p-fluorotoluene(352-11-4)

alpha-Chloro-p-fluorotoluene(352-11-4)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
alpha-Chloro-p-fluorotoluene
Synonyms
4-Fluorobenzyl chloride
4-Fluorophenylmethyl chloride
a-Chloro-4-fluorotoluene
a-Chloro-p-fluorotoluene
p-Fluorobenzyl chloride
CAS
352-11-4
Formula
C7H6ClF
Molecular Weight
144.58000000000001
EINECS
206-516-4
Beilstein/Gmelin
742272
Beilstein Reference
4-05-00-00813
EC Class
corrosive

Physical and Chemical Properties

Appearance
Clear, colorless liquid.
Solubility in water
Insoluble
Melting Point
-18
Boiling Point
181.2
Vapor Pressure
199 (20 C)
Density
1.2196 g/cm3 (15 C)
Vapor Density
5
Refractive Index
1.513 (20 C)

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Store protected from moisture.
Handling
Wash thoroughly after handling. Use only in a well ventilated area. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Do not get on skin or in eyes. Do not ingest or inhale. Do not allow contact with water. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns.
Inhalation
May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract.
Skin
Causes skin burns. May cause severe irritation and possible burns.
Eyes
Causes eye burns. Contact with eyes may cause severe irritation, and possible eye burns.
Hazards
Contact with metals may evolve flammable hydrogen gas.
EC Risk Phrase
R 34 36
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
1760

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Fire Fighting Measures

Flash Point
60
Autoignition
590
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Extinguishing media: Do NOT use water directly on fire. In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers.
Fire Potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

Stability and Reactivity

Disposal Code
9
Incompatibilities
Oxidizing agents
Stability
Stable under normal temperatures and pressures.
Decomposition
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1760
Hazard Class
8
Packing Group
I; II; III
HS Code
2903 69 90
Contact More