Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > 1-(2,6-Difluorophenyl)ethan-1-one > 1-(2,6-Difluorophenyl)ethan-1-one(13670-99-0)

1-(2,6-Difluorophenyl)ethan-1-one(13670-99-0)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity

Product Identification

Product Name
1-(2,6-Difluorophenyl)ethan-1-one
Synonyms
Ethanone, 1-(2,6-difluorophenyl)-
CAS
13670-99-0
Formula
C8H6F2O
Molecular Weight
156.13
EINECS
237-151-9
Beilstein/Gmelin
2046068

Physical and Chemical Properties

Appearance
Colorless liquid.
Boiling Point
76 - 79 (15 torr)
Density
1.19 g/cm3
Vapor Density
5.38
Refractive Index
1.48 (20 C)

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Wash mouth out with water.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep containers tightly closed.
Handling
Wash thoroughly after handling. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Use with adequate ventilation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Ingestion
May cause irritation of the digestive tract.
Inhalation
Causes respiratory tract irritation. Causes irritation of the mucous membrane.
Skin
Causes skin irritation.
Eyes
Causes eye irritation.
EC Risk Phrase
R 36/37/38
EC Safety Phrase
S 26 36

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Flash Point
76
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Use water spray to keep fire-exposed containers cool. Combustible Liquid. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Provide ventilation.

Stability and Reactivity

Stability
Stable under normal temperatures and pressures.
Incompatibilities
Strong oxidizing agents, strong bases.
Decomposition
Carbon monoxide, carbon dioxide, hydrogen fluoride.
Contact More