Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > 2,3,3-Trimethylindolenine > 2,3,3-Trimethylindolenine(1640-39-7)

2,3,3-Trimethylindolenine(1640-39-7)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity

Product Identification

Product Name
2,3,3-Trimethylindolenine
Synonyms
2,3,3-Trimethyl-3H-indole
CAS
1640-39-7
Formula
C11H13N
Molecular Weight
159.22999999999999
EINECS
216-685-6
Beilstein/Gmelin
119740
Beilstein Reference
5-20-07-00138

Physical and Chemical Properties

Appearance
Light yellow to dark red-brown liquid.
Melting Point
6 - 8
Boiling Point
228
Density
0.99 g/cm3
Refractive Index
1.55 (20 C)

First Aid Measures

Ingestion
Get medical aid. Wash mouth out with water.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Skin
Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Handling
Wash thoroughly after handling. Use only in a well ventilated area. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Ingestion
No information found.
Inhalation
Causes respiratory tract irritation.
Skin
Causes skin irritation.
Eyes
Causes eye irritation.
EC Risk Phrase
R 36/37/38
EC Safety Phrase
S 26 36

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Flash Point
93
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Containers may explode when heated. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Provide ventilation.

Stability and Reactivity

Stability
No information found.
Incompatibilities
Oxidizing agents
Decomposition
Nitrogen oxides, carbon monoxide, carbon dioxide.
Contact More