Home > 4'-(Chloroacetyl)-acetanilide > 4'-(Chloroacetyl)-acetanilide(140-49-8)
4'-(Chloroacetyl)-acetanilide(140-49-8)
Supplier Product Identification
Physical and Chemical Properties
First Aid Measures
Handling and Storage
Hazards Identification
Exposure Controls/Personal Protection
Fire Fighting Measures
Accidental Release Measures
Stability and Reactivity
Product Identification
Product Name
4'-(Chloroacetyl)-acetanilide
4'-(Chloroacetyl)-acetanilide
Synonyms
1-Acetamido-4-chloroacetylbenzene
1-Acetylamino-4-chloroacetylbenzene
4-Acetylaminophenacyl chloride
N-[4-(2-Chloroacetyl)phenyl]acetamide
p-(Acetylamino)phenacyl chloride
p-Acetamidophenacyl chloride
1-Acetamido-4-chloroacetylbenzene
1-Acetylamino-4-chloroacetylbenzene
4-Acetylaminophenacyl chloride
N-[4-(2-Chloroacetyl)phenyl]acetamide
p-(Acetylamino)phenacyl chloride
p-Acetamidophenacyl chloride
CAS
140-49-8
140-49-8
Formula
C10H10ClNO2
C10H10ClNO2
Molecular Weight
211.66
211.66
EINECS
205-416-8
205-416-8
RTECS
AE1050000
AE1050000
RTECS Class
Tumorigen; Mutagen
Tumorigen; Mutagen
Beilstein/Gmelin
2724140
2724140
Beilstein Reference
1-14-00-00367
1-14-00-00367
Physical and Chemical Properties
Appearance
Odorless yellow-orange solid or brown powder.
Odorless yellow-orange solid or brown powder.
Solubility in water
Insoluble
Insoluble
Melting Point
215
215
Boiling Point
393
393
Density
1.348 g/cm3 (20 C)
1.348 g/cm3 (20 C)
Partition Coefficient
.78
.78
Usage
Chemical intermediate for c.I. Solubilised vat yellow 8.
Chemical intermediate for c.I. Solubilised vat yellow 8.
First Aid Measures
Ingestion
DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.
DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.
Inhalation
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.
Skin
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
Eyes
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Handling and Storage
Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards Identification
Ingestion
See inhalation.
See inhalation.
Inhalation
Symptoms of exposure to this compound may include methemoglobinemia.
Symptoms of exposure to this compound may include methemoglobinemia.
Skin
See inhalation.
See inhalation.
Eyes
See inhalation
See inhalation
Exposure Controls/Personal Protection
Personal Protection
Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
Respirators
Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter.
Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter.
Fire Fighting Measures
Flash Point
110
110
Fire Fighting
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. A water spray may also be used.
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. A water spray may also be used.
Fire Potential
This compound is combustible.
This compound is combustible.
Accidental Release Measures
Small spills/leaks
Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
Stability and Reactivity
Stability
No data.
No data.
Incompatibilities
Reacts with oxidizers.
Reacts with oxidizers.
Contact
More
- Company Name:Meryer (Shanghai) Chemical Technology Co., Ltd.
- Tel:021-61259108 18621169109
- Fax:86-21-61259102
- WebSite:https://www.meryer.com/cn/index/
- Company Name:Chemsky(shanghai)International Co.,Ltd.
- Tel:021-50135380
- Fax:
- WebSite:http://www.shchemsky.com
- Company Name:Shandong Xiya Chemical Co., Ltd
- Tel:4009903999 13355009207
- Fax:0539-6365991
- WebSite:http://www.xiyashiji.com
- Company Name:Hangzhou Yuhao Chemical Technology Co., Ltd
- Tel:0571-82693216
- Fax:+86-571-82880190
- WebSite:http://www.chemyuhao.com
- Company Name:Shanghai Raise Chemical Technology Co.,Ltd
- Tel:+86-021-50935922
- Fax:+86-021-33847795
- WebSite:http://www.raise-chem.com