Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 4-Iodobenzenesulfonyl chloride > 4-Iodobenzenesulfonyl chloride(98-61-3)

4-Iodobenzenesulfonyl chloride(98-61-3)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
4-Iodobenzenesulfonyl chloride
Synonyms
4-Iodobenzenesulfonyl chloride
4-Iodophenylsulfonyl chloride
p-Iodobenzenesulfonyl chloride
p-Iodophenylsulfonyl chloride
CAS
98-61-3
Formula
C6H4ClIO2S
Molecular Weight
302.52
EINECS
202-686-9
Beilstein/Gmelin
2691661
Beilstein Reference
4-11-00-00169
EC Class
corrosive

Physical and Chemical Properties

Appearance
Gray to brown powder.
Solubility in water
Insoluble
Melting Point
80 - 83

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Do not use mouth-to-mouth respiration if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage
Store in a tightly closed container. Corrosives area. Store protected from moisture. Store in a cool, dry area away from incompatible substances.
Handling
Use only in a well ventilated area. Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Do not ingest or inhale. Do not allow contact with water. Discard contaminated shoes. Keep from contact with moist air and steam.

Hazards Identification

Inhalation
May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. May cause systemic effects.
Skin
Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Eyes
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause systemic effects.
Hazards
Contact with metals may evolve flammable hydrogen gas.
EC Risk Phrase
R 34
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
1759

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Effects may be delayed.

Fire Fighting Measures

Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Water hydrolyzes material liberating acidic gas which in contact with metal surfaces can generate flammable and/or explosive hydrogen gas. Extinguishing media: Do NOT use water directly on fire. Use foam, dry chemical, or carbon dioxide. Do NOT get water inside containers.
Fire Potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Accidental Release Measures

Small spills/leaks
Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation. Do not get water inside containers.

Stability and Reactivity

Incompatibilities
Moisture, water, strong oxidizing agents, strong bases.
Stability
Stable under normal temperatures and pressures. Moisture sensitive. Substance readily hydrolyzed.
Decomposition
Hydrogen chloride, carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide, hydrogen iodide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1759
Hazard Class
8
Packing Group
I; II; III
HS Code
2904 90 20
Contact More