Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > N-Methyl-2,2,6,6-tetramethyl-4-piperidinol > N-Methyl-2,2,6,6-tetramethyl-4-piperidinol(2403-89-6)

N-Methyl-2,2,6,6-tetramethyl-4-piperidinol(2403-89-6)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
N-Methyl-2,2,6,6-tetramethyl-4-piperidinol
Synonyms
1,2,2,6,6-Pentamethyl-4-hydroxypiperidine
1,2,2,6,6-pentamethyl-4-piperidinol
4-Hydroxy-1,2,2,6,6-pentamethylpiperidine
HOPEMP
CAS
2403-89-6
Formula
C10H21NO
Molecular Weight
171.28
EINECS
219-292-8
Beilstein/Gmelin
1498
Beilstein Reference
5-21-01-00160

Physical and Chemical Properties

Appearance
Yellow-beige.
Solubility in water
Very soluble
Boiling Point
238
Density
0.967 g/cm3
pKa/pKb
10.49 (pKb)

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area.
Handling
Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Discard contaminated shoes.

Hazards Identification

Inhalation
Causes chemical burns to the respiratory tract. The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. May cause systemic effects.
Skin
Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Eyes
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. The toxicological properties of this substance have not been fully investigated. May cause systemic effects.
Hazards
Contact with metals may evolve flammable hydrogen gas.
UN (DOT)
1759

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Effects may be delayed.

Fire Fighting Measures

Flash Point
118
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
Fire Potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Accidental Release Measures

Small spills/leaks
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation.

Stability and Reactivity

Incompatibilities
Oxidizing agents.
Stability
Stable at room temperature in closed containers under normal storage and handling conditions.
Decomposition
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and gases, carbon dioxide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1759
Hazard Class
8
Packing Group
I; II; III
Contact More