Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Polyphosphoric acids > Polyphosphoric acids(8017-16-1)

Polyphosphoric acids(8017-16-1)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Polyphosphoric acids
Synonyms
Condensed phosphoric acid
Phospholeum
Super Phos 105
CAS
8017-16-1
Molecular Weight
98
EINECS
232-417-0
Beilstein/Gmelin
NA
EC Class
corrosive

Physical and Chemical Properties

Appearance
Clear, colorless, oily liquid, odorless, hygroscopic.
Solubility in water
60 cSt
Melting Point
-20
Boiling Point
530
Vapor Pressure
15 (20 C)
Density
2.05 g/cm3
Usage
As protein precipitants to coagulate proteins, separate & purify them.

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage
Keep container closed when not in use. Keep away from water. Corrosives area. Do not store in metal containers.
Handling
Keep container tightly closed. Do not get on skin or in eyes. Do not ingest or inhale. Use with adequate ventilation. Do not allow contact with water. Discard contaminated shoes.

Hazards Identification

Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns.
Inhalation
May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract.
Skin
Causes skin burns.
Eyes
Causes eye burns.
Hazards
Contact with metals may evolve flammable hydrogen gas.
EC Risk Phrase
R 34
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
3264

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Fire Fighting Measures

Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Reaction with water may generate much heat which will increase the concentration of fumes in the air. Contact with metals may evolve flammable hydrogen gas. Extinguishing media: Do NOT get water inside containers. For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray. Cool containers with flooding quantities of water until well after fire is out.
Fire Potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment.

Stability and Reactivity

Disposal Code
12
Incompatibilities
Nitrates, water, metals, strong bases, alcohols, aluminum, chlorates, finely powdered metals, steel, water reactive substances (e.g. acetic anyhdride, alkyl aluminum chloride, calcium carbide, ethyl dichlorosilane).
Stability
Stable under normal temperatures and pressures.
Decomposition
Phosphine, oxides of phosphorus, irritating and toxic fumes and gases.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
3264
Hazard Class
8
Packing Group
I; II; III
HS Code
2809 20 00
Contact More