Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 2,3-Dimethoxybenzaldehyde > 2,3-Dimethoxybenzaldehyde(86-51-1)

2,3-Dimethoxybenzaldehyde(86-51-1)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
2,3-Dimethoxybenzaldehyde
Synonyms
2,3-Dimethoxybenzaldehyde
CAS
86-51-1
Formula
C9H10O3
Molecular Weight
166.18
EINECS
201-677-7
Beilstein/Gmelin
908264
Beilstein Reference
4-08-00-01747

Physical and Chemical Properties

Appearance
Very slightly yellow liquid. Aldehyde-like odor.
Solubility in water
Slightly soluble
Melting Point
48 - 49
Boiling Point
267
Vapor Pressure
0.01 (25 C)
Partition Coefficient
1.28
Heat Of Vaporization
50.5 kJ/mol
Heat Of Combustion
-4568 kJ/mol
Vapor Density
5.73

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation.

Hazards Identification

Inhalation
Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Can produce delayed pulmonary edema.
Skin
Causes skin irritation.
Eyes
Causes eye irritation. May cause chemical conjunctivitis.
Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
EC Risk Phrase
R 36/37/38
EC Safety Phrase
S 26 36

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Effects may be delayed.

Fire Fighting Measures

Flash Point
106
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Containers may explode when heated. Extinguishing media: Use agent most appropriate to extinguish fire. Cool containers with flooding quantities of water until well after fire is out. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

Accidental Release Measures

Small spills/leaks
Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Provide ventilation.

Stability and Reactivity

Disposal Code
3
Incompatibilities
Oxidizing agents.
Stability
Stable at room temperature in closed containers under normal storage and handling conditions.
Decomposition
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.

Transport Information

HS Code
2912 49 00
Contact More