Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > 3-Hydroxyphenyl acetate > 3-Hydroxyphenyl acetate(102-29-4)

3-Hydroxyphenyl acetate(102-29-4)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity

Product Identification

Product Name
3-Hydroxyphenyl acetate
Synonyms
1,3-Benzenediol monoacetate
3-Acetoxyphenol
Acetylresorcinol
Euresol
m-Hydroxyphenyl acetate
Remonol
CAS
102-29-4
Formula
C8H8O3
Molecular Weight
152.13999999999999
EINECS
203-022-0
RTECS
VH2750000
RTECS Class
Drug; Primary Irritant
Beilstein/Gmelin
1865490
Beilstein Reference
4-06-00-05672

Physical and Chemical Properties

Appearance
Clear brown to yellow brown viscous liquid.
Solubility in water
Slightly soluble
Melting Point
55 - 56
Boiling Point
283
Vapor Pressure
0.002 (25 C)
Density
1.234 g/cm3
pKa/pKb
9.20 (pKa)
Partition Coefficient
1.23
Heat Of Vaporization
54.3 kJ/mol
Vapor Density
5.25
Refractive Index
1.5349 (20 C)

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage
Store in a tightly closed container. Store in a cool, dry area away from incompatible substances.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation. Wash clothing before reuse.

Hazards Identification

Inhalation
Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Can produce delayed pulmonary edema.
Skin
Causes skin irritation.
Eyes
Causes severe eye irritation.
Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Prolonged exposure can cause damage to the eyes, severe irritation or burns. Depending on intensity and duration of exposure, effects may vary from mild irritation to severe destruction of tissue.

Fire Fighting Measures

Flash Point
121
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire, use carbon dioxide, dry chemical powder or appropriate foam.

Accidental Release Measures

Small spills/leaks
Wash area with soap and water. Clean up spills immediately, using the appropriate protective equipment. Cover with sand, dry lime or soda ash and place in a closed container for disposal. Provide ventilation.

Stability and Reactivity

Incompatibilities
Oxidizing agents, acids, bases, acid anhydrides.
Stability
Stable under normal temperatures and pressures.
Decomposition
Carbon monoxide, carbon dioxide.
Contact More