Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 1,5-Diazabicyclo[4.3.0]non-5-ene > 1,5-Diazabicyclo[4.3.0]non-5-ene(3001-72-7)

1,5-Diazabicyclo[4.3.0]non-5-ene(3001-72-7)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
1,5-Diazabicyclo[4.3.0]non-5-ene
Synonyms
2,3,4,6,7,8-Hexahydropyrrolo[1,2-a]pyrimidine
DBN
CAS
3001-72-7
Formula
C7H12N2
Molecular Weight
124.19
EINECS
221-087-3
Beilstein/Gmelin
2417
Beilstein Reference
5-23-05-00239
EC Class
corrosive

Physical and Chemical Properties

Appearance
Clear slightly yellow liquid.
Solubility in water
Very soluble
Boiling Point
95
Density
1 g/cm3
pKa/pKb
0.90 (pKb)
Vapor Density
4.28
Refractive Index
1.5190 (20 C)

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Do not expose to air. Store protected from moisture. Store under an inert atmosphere.
Handling
Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Handle under an inert atmosphere. Store protected from air. Do not allow contact with water. Discard contaminated shoes. Keep from contact with moist air and steam.

Hazards Identification

Inhalation
May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. May cause systemic effects.
Skin
Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Eyes
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause systemic effects.
Hazards
Contact with metals may evolve flammable hydrogen gas.
EC Risk Phrase
R 34
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
1760

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Effects may be delayed.

Fire Fighting Measures

Flash Point
94
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use agent most appropriate to extinguish fire. Do NOT get water inside containers.
Fire Potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation. Place under an inert atmosphere. Do not get water inside containers.

Stability and Reactivity

Disposal Code
1
Incompatibilities
Moisture, air, acids, acid anhydrides, acid chlorides, oxidizing agents, chloroformates.
Stability
Stable under normal temperatures and pressures. May discolor on exposure to air and moisture.
Decomposition
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1760
Hazard Class
8
Packing Group
I; II; III
HS Code
2933 59 95
Contact More