Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Bis(diethyldithiocarbamate)cadmium complex > Bis(diethyldithiocarbamate)cadmium complex(14239-68-0)

Bis(diethyldithiocarbamate)cadmium complex(14239-68-0)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Bis(diethyldithiocarbamate)cadmium complex
Synonyms
bis(Diethyldithiocarbamato)cadmium
Cadmate
Cadmium bis(diethyldithiocarbamate)
Cadmium bis(N,N-diethyldithiocarbamate)
Cadmium di(diethyldithiocarbamate)
Cadmium diethyl dithiocarbamate
CAS
14239-68-0
Formula
C10H20CdN2S4
Molecular Weight
408.96
EINECS
238-113-4
RTECS
EU9850000
RTECS Class
Tumorigen; Mutagen
Beilstein/Gmelin
8539673

Physical and Chemical Properties

Appearance
White to cream colored rods.
Solubility in water
insoluble
Melting Point
68-76
Density
1.39 g/cm3 (20 C)
Usage
Accelerator for butyl rubber.

First Aid Measures

Ingestion
Activated charcoal has no proven benefit in cadmium poisoning, but may be considered. Activated charcoal: administer charcoal as a slurry (240 ml water/30 g charcoal). Usual dose: 25 to 100 g in adults/adolescents. Chelation - although not demonstrably efficacious, chelation therapy may be of benefit immediately following acute exposure. Administer cana2 edta 75 mg/kg/day deep im or slow iv infusion given in 3 to 6 divided doses for up to 5 days. May be repeated for a second course after a minimum of two days drug holiday; each course should not exceed a total of 500 mg/kg body weight. Caution: bal must not be used with cadmium since the complex is nephrotoxic.
Inhalation
Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with beta2 agonist and corticosteroid aerosols.
Skin
Remove and isolate contaminated clothing and shoes. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin.
Eyes
Immediately flush with running water for at least 20 minutes.

Handling and Storage

Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

Hazards Identification

Inhalation
Acute inhalation of fumes can cause cough, dyspnea and chest tightness which is similar to metal fume fever, but which may progress to pneumonitis, pulmonary edema, and death due to respiratory failure in severe cases. Acute exposure can result in residual emphysema and fibrosis.
Skin
Skin eruptions and pruritus may occur.
Eyes
See Inhalation.
Ingestion
Ingestion - nausea, vomiting, abdominal pain and cramping, diarrhea, salivation, dry mouth, and substernal pain occur.
Hazards
Contact with metals may evolve flammable hydrogen gas.
UN (DOT)
2570

Exposure Controls/Personal Protection

Personal Protection
Where adequate ventilation is impossible to maintain. Dispensers of liquid detergent should be available. In the laboratory, gloves and protective clothing should always be worn but should not be assumed to provide full protection. Carefully fitted masks or respirators may be necessary when working with particulates or gases, and disposable plastic aprons might provide additional protection. Protective clothing should be of distinctive color, as a reminder not to be worn outside the laboratory.
Respirators
Respirators should be carried and air sampled to determine cadmium concentration.<BR>Conditions: escape from suddenly occurring respiratory hazards: respirators class(es): any air-purifying, full-facepiece respirator with a high-efficiency particulate filter. Any appropriate escape-type, self-contained breathing apparatus.
Exposure Effects
CNS effects of acute exposures have included delayed parkinsonism. Smoking and industrial exposure to cadmium has resulted in increased placental levels of cadmium.
Exposure limit(s)
IDHL: NIOSH recommends that cadmium dust be regulated as a potential human

Fire Fighting Measures

Fire Fighting
Extinguish using agent most appropriate for surrounding fire.
Fire Potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Accidental Release Measures

Small spills/leaks
ELIMINATE all ignition sources. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS.

Stability and Reactivity

Incompatibilities
Avoid contact with strong oxidizers; elemental sulfur, selenium and tellurium.
Stability
No data.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
2570
Hazard Class
6.1
Packing Group
I; II; III
Contact More