Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 2-tert-Butylphenol > 2-tert-Butylphenol(88-18-6)

2-tert-Butylphenol(88-18-6)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
2-tert-Butylphenol
Synonyms
2-(1,1-Dimethylethyl)phenol
2-tert-Butyl-1-hydroxybenzene
Phenol, 2-(1,1-dimethylethyl)-
CAS
88-18-6
Formula
C10H14O
Molecular Weight
150.22
EINECS
201-807-2
RTECS
SJ8921000
RTECS Class
Primary Irritant
Beilstein/Gmelin
1907120
Beilstein Reference
4-06-00-03292
EC Class
harmful, corrosive, dangerous for the environment

Physical and Chemical Properties

Appearance
Light yellow liquid.
Solubility in water
2.3 g/L
Melting Point
-7
Boiling Point
221
Vapor Pressure
0.0002 (25 C)
Density
0.9823 g/cm3 (20 C)
pKa/pKb
10.28 (pKa)
Partition Coefficient
3.31
Heat Of Vaporization
184.70 kJ/mol
Heat Of Combustion
-5683 kJ/mol
Usage
Chemical intermediate for synthetic resins, plasticizers, surface-active agents, perfumes, & other products.
Vapor Density
5.18
Refractive Index
1.5160 (20 C)

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage
Store in a cool, dry place. Keep container closed when not in use. Corrosives area.
Handling
Avoid breathing dust, vapor, mist, or gas. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Use only in a chemical fume hood. Discard contaminated shoes.

Hazards Identification

Inhalation
May cause methemoglobinemia, cyanosis, convulsions, tachycardia, dyspnea, and death. May cause liver and kidney damage. Causes chemical burns to the respiratory tract. May cause adverse central nervous system effects including headache, convulsions, and possible death. Aspiration may lead to pulmonary edema. May cause cardiac abnormalities. May cause systemic effects.
Skin
Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Eyes
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause liver and kidney damage. May cause perforation of the digestive tract. May cause cardiac disturbances. May cause methemoglobinemia, cyanosis, convulsions, and death. May cause central nervous system effects. May cause systemic effects.
Hazards
When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.
EC Risk Phrase
R 22 34
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
3145

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Exposure Effects
May cause liver and kidney damage. May cause methemoglobinemia, which is characterized by chocolate-brown colored blood, headache, weakness, dizziness, breath shortness, cyanosis, rapid heart rate, unconsciousness and possible death. Effects may be delayed.
Poison Class
4

Fire Fighting Measures

Flash Point
96
Autoignition
370
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Combustible material; may burn but does not ignite readily. Runoff from fire control or dilution water may cause pollution. Extinguishing media: Use water spray to cool fire-exposed containers. Do NOT get water inside containers. For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray.
Fire Potential
Combustible material: may burn but does not ignite readily.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation.

Stability and Reactivity

Disposal Code
1
Incompatibilities
Acid chlorides, acid anhydrides, brass, oxidizing agents, steel, copper, copper alloys.
Stability
Stable under normal temperatures and pressures.
Decomposition
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
3145
Hazard Class
8
Packing Group
I; II; III
HS Code
2907 19 00
Contact More