Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Tetrahydrocyclopentadiene > Tetrahydrocyclopentadiene(2825-82-3)

Tetrahydrocyclopentadiene(2825-82-3)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Tetrahydrocyclopentadiene
Synonyms
4,7-Methano-1H-indene, octahydro-, (3a-alpha,4-beta,7-beta,7a-alpha)
exo-5,6-Trimethylenenorbornane
exo-Hexahydro-4,7-methanoindan
exo-Tetrahydrobicyclopentadiene
exo-Tetrahydrodi(cyclopentadiene)
CAS
2825-82-3
Formula
C10H16
Molecular Weight
136.26
EINECS
220-585-8
RTECS
PB9600000
RTECS Class
Tumorigen; Mutagen; Reproductive Effector
Beilstein/Gmelin
5726015

Physical and Chemical Properties

Appearance
Ckear, colorless solution.
Solubility in water
Insoluble
Boiling Point
182
Vapor Pressure
<5
Density
0.935 g/cm3 (20 C)

First Aid Measures

Ingestion
Seek medical assistance.
Inhalation
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult.
Skin
Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush with running water for at least 20 minutes. Wash skin with soap and water.
Eyes
In case of contact with substance, immediately flush with running water for at least 20 minutes.

Handling and Storage

Storage
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Handling
Containers of this material may be hazardous when emptied. Since emptied containers retain product residues (vapor, liquid, and/or solid), all hazard precautions given in the data sheet must be observed. All five-gallon pails and larger metal containers, including tank cars and tank trucks, should be grounded and/or bonded when material is transferred.

Hazards Identification

Inhalation
See ingestion.
Skin
May cause burns.
Eyes
See Skin.
Ingestion
Swallowing small amounts of this material during normal handling is not likely to cause harmful effects. Swallowing large amounts may be harmful. This material can get into the lungs during swallowing or vomiting. This results in lung inflammation and other lung injury.
UN (DOT)
1325

Exposure Controls/Personal Protection

Personal Protection
Wear appropriate protective gloves, clothing and goggles.
Respirators
Wear positive pressure self-contained breathing apparatus (SCBA).
Exposure Effects
The toxological properties of this substance have not been fully investigated.

Fire Fighting Measures

Flash Point
52
Fire Fighting
Small Fires: Dry chemical, carbon dioxide, sand, earth, water spray or regular foam. Large Fires: Water spray, fog or regular foam.
Fire Potential
Flammable/combustible material. May be ignited by friction, heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Make no contact with the spilled material. ELIMINATE all ignition sources and ground all equipment. With clean shovel place material into clean, dry container and cover loosely; move containers from spill area.

Stability and Reactivity

Stability
Stable under normal shipping and handling conditions.
Incompatibilities
Strong oxidizing agents.
Decomposition
Carbon dioxide and carbon monoxide, various hydrocarbons.
Combustion Products
Fire may produce irritating and/or toxic gases.

Transport Information

UN Number
1325
Hazard Class
4.1
Packing Group
II; III
Contact More