Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Sodium bisulfate monohydrate > Sodium bisulfate monohydrate(10034-88-5)

Sodium bisulfate monohydrate(10034-88-5)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Sodium bisulfate monohydrate
Synonyms
Sodium bisulfate monohydrate
CAS
10034-88-5
Formula
H3NaO5S
Molecular Weight
138.07
EINECS
231-665-7
RTECS
VZ1870000
RTECS Class
Other
Beilstein/Gmelin
6359 (G)
EC Index Number
016-046-00-X
EC Class
irritant

Physical and Chemical Properties

Appearance
White monoclinic crystals
Solubility in water
1080 g/L (20 C)
Melting Point
183
Density
2.1 g/cm3 (20 C)
Heat Of Vaporization
Usage
Used in household cleaners, a preservative for soil and water samles.
Refractive Index
1/43

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Do not allow contact with water. Use only in a chemical fume hood. Discard contaminated shoes. Keep from contact with moist air and steam.

Hazards Identification

Inhalation
May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema. Causes chemical burns to the respiratory tract. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Skin
Causes skin burns.
Eyes
Causes eye burns.
Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns.
Hazards
Contact with metals may evolve flammable hydrogen gas.
EC Risk Phrase
R 41
EC Safety Phrase
S 24 26
UN (DOT)
1759

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Repeated exposure may cause erosion of teeth. Symptoms of exposure may include burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea and vomiting.
Poison Class
3 (Strong toxins)

Fire Fighting Measures

Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Do NOT use water directly on fire. Use water spray to cool fire-exposed containers. Use dry chemical to fight fire. Do NOT get water inside containers.
Fire Potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Accidental Release Measures

Small spills/leaks
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation. Do not get water inside containers.

Stability and Reactivity

Incompatibilities
Moisture, strong oxidizing agents, strong bases, hypochlorite.
Stability
Stable under normal temperatures and pressures.
Decomposition
Oxides of sulfur.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1759
Hazard Class
8
Packing Group
I; II; III
HS Code
2833 19 00
Contact More