Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Titanous chloride > Titanous chloride(7705-07-9)

Titanous chloride(7705-07-9)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Titanous chloride
Synonyms
Titanium (III) chloride
Titanium trichloride, pyrophoric
Titanous chloride
Trichlorotitanium
CAS
7705-07-9
Formula
Cl3Ti
Molecular Weight
154.22999999999999
EINECS
231-728-9
RTECS
XR1924000
RTECS Class
Reproductive Effector
Merck
12,9620
Beilstein/Gmelin
1933 (G)

Physical and Chemical Properties

Appearance
A dark violet crystalline solid.
Solubility in water
Very soluble
Melting Point
440
Boiling Point
960
Density
1.32 g/cm3
Usage
Used to make other chemicals.
Vapor Density
>1
Refractive Index
1.4856 (25 C)

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately.
Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause circulatory system failure. May cause perforation of the digestive tract. May cause systemic effects.
Ingestion
Treat ingestions of greater than 40 milligrams per kilogram with decontamination of the stomach if within 4 hours of ingestion. Administer charcoal as a slurry.
Inhalation
May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. May cause systemic effects.
Inhalation
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Skin
Remove and isolate contaminated clothing and shoes. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin.
Skin
Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Eyes
Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).
Eyes
Immediately flush with running water for at least 20 minutes.
Eyes
Causes eye burns. May cause chemical conjunctivitis and corneal damage.

Handling and Storage

Storage
Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Do not expose to air. Store under an inert atmosphere.
Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Keep container tightly closed. Do not get on skin or in eyes. Do not ingest or inhale. Use with adequate ventilation. Handle under an inert atmosphere. Store protected from air. Discard contaminated shoes.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

Hazards Identification

Ingestion
See Inhalation.
Inhalation
TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns, or death.
Skin
See Inhalation.
Eyes
See Inhalation.
Hazards
Vapors may accumulate in confined areas (basement, tanks, hopper/tank cars, etc.). Substance will react with water (some violently), releasing corrosive and/or toxic gases. Reaction with water may generate much heat which will increase the concentration of fumes in the air. Contact with metals may evolve flammable hydrogen gas.
Hazards
May ignite on contact with moist air or moisture. May burn rapidly with flare-burning effect. Some react vigorously or explosively on contact with water. Some may decompose explosively when heated or involved in a fire. May re-ignite after fire is extinguished. Runoff may create fire or explosion hazard.
UN (DOT)
2441
UN (DOT)
2869

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.
Personal Protection
Wear appropriate protective gloves, clothing and goggles.
Respirators
Wear positive pressure self-contained breathing apparatus (SCBA).
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Effects may be delayed. Reproductive effects have been reported in animals.

Fire Fighting Measures

Fire Fighting
Note: Most foams will react with the material and release corrosive/toxic gases. Small Fires: carbon dioxide (except for Cyanides), dry chemical, dry sand, alcohol-resistant foam. Large Fires: Water spray, fog or alcohol-resistant foam.
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Use extinguishing media appropriate to the surrounding fire. Substance is noncombustible. Extinguishing media: Substance is noncombustible; use agent most appropriate to extinguish surrounding fire.
Fire Potential
Flammable/combustible material.
Fire Potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation. Place under an inert atmosphere.
Small spills/leaks
ELIMINATE all ignition sources and ground all equipment used when handling the product. Avoid contact with spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. A vapor suppressing foam may be used to reduce vapors. DO NOT GET WATER INSIDE CONTAINERS. Cover with DRY earth, DRY sand, or other non-combustible material followed with plastic sheet to minimize spreading or contact with rain. Use clean non-sparking tools to collect material and place it into loosley covered plastic containers for later disposal.

Stability and Reactivity

Incompatibilities
Air, strong oxidizing agents.
Stability
No data.
Stability
Stable under normal temperatures and pressures.
Decomposition
Hydrogen chloride, irritating and toxic fumes and gases, titanium/titanium oxides, hydrogen gas.
Combustion Products
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.
Combustion Products
Fire will produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
2441
UN Number
2869
Hazard Class
4.2
Hazard Class
8
Packing Group
I
Packing Group
II; III
Contact More